Modal Md Worcss6 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 minutes

Sections

Modal MD-WORCSS6 Teardown Guide
5 steps
Battery
1 step

Flags

BackModal MD-WORCSS6
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Modal MD-WORCSS6 Teardown Guide

Put on Electrostatic Discharge (ESD) bracelet. Hold the device with the transparent plastic casing on the top.
Using the jimmy tool, carefully pry off the black plastic ring.
Remove the spring assembly from inside the transparent plastic tube.

Put on Electrostatic Discharge (ESD) bracelet. Hold the device with the transparent plastic casing on the top.

Using the jimmy tool, carefully pry off the black plastic ring.

Remove the spring assembly from inside the transparent plastic tube.

1024

Step 2

Using a Phillips #1 screwdriver, unscrew each of the four 12.7 mm screws inside and at the bottom of the plastic tube.
Take the plastic tube off of the metal casing.

Using a Phillips #1 screwdriver, unscrew each of the four 12.7 mm screws inside and at the bottom of the plastic tube.

Take the plastic tube off of the metal casing.

Step 3

Place the jimmy tool blade between the button assembly and the metal casing. Gently pry off the button assembly; it should pop out.
With the button assembly removed, slide off the metal casing.

Place the jimmy tool blade between the button assembly and the metal casing. Gently pry off the button assembly; it should pop out.

With the button assembly removed, slide off the metal casing.

Step 4

Unscrew the two 6.4 mm screws in the black plastic body using the Phillips #1 screwdriver.
Separate the two halves of the plastic body. Keep the half containing the motor facing up.

Unscrew the two 6.4 mm screws in the black plastic body using the Phillips #1 screwdriver.

Separate the two halves of the plastic body. Keep the half containing the motor facing up.

Step 5

Carefully peel the tape off far enough to remove the 3 batteries.

Carefully peel the tape off far enough to remove the 3 batteries.

Step 6

              Battery

Replace the batteries by pulling them out of their holder and putting new ones in the same places.

Replace the batteries by pulling them out of their holder and putting new ones in the same places.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors

                    Luke Timmerman

Member since: 10/02/2019

298 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       The Citadel Military College of South Carolina, Team S3-G13, Eggleston Fall 2019                        

                                                  Member of The Citadel Military College of South Carolina, Team S3-G13, Eggleston Fall 2019 



                    CMCSC-EGGLESTON-F19S3G13                     


                                            3 Members                     


                                            4 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team