Difficulty
Easy
Steps
2
Time Required
2 minutes
Sections
1
- Bottom Plate
- 2 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackMNT Reform
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Please be extra careful while and after opening the case of the device. MNT Reform uses eight 18650 batteries in series. When fully charged, these combine to a voltage of almost 29 volts, and the battery cells can easily deliver multiple amperes of current. Do not touch the metal pins of the battery holders with metal tools.
What you need
Step 1
Remove Bottom Plate Screws
- Remove the following screws securing the transparent acrylic bottom plate to the main box:
- Ten M2×6mm silver Phillips screws
Remove the following screws securing the transparent acrylic bottom plate to the main box:
Ten M2×6mm silver Phillips screws
1024
Step 2
Remove Bottom Plate
- Lift the bottom plate and set it aside.
- Before servicing anything on the inside, make sure to remove all battery cells.
Lift the bottom plate and set it aside.
Before servicing anything on the inside, make sure to remove all battery cells.
To reassemble your device, follow these instructions in reverse order. Ensure that no cables are squeezed when replacing the bottom plate. Don’t overtighten screws.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Neelfyn
Member since: 05/13/2014
386 Reputation
4 Guides authored
Badges:
7
+4 more badges