Difficulty
Easy
Steps
6
Time Required
20 minutes
Sections
2
- Lamp
- 4 steps
- Back Panel
- 2 steps
Flags
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackMitsubishi WD57734
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Lamp
- Before disassembling your television, be sure it is powered off and unplugged.
- Remove the single 18 mm Phillips #1 screw on the lamp access panel.
Before disassembling your television, be sure it is powered off and unplugged.
Remove the single 18 mm Phillips #1 screw on the lamp access panel.
1024
Step 2
- Pull the lamp access panel off of the back panel of the television by pulling straight back on the left side of the panel near the screw then pulling to the left.
Pull the lamp access panel off of the back panel of the television by pulling straight back on the left side of the panel near the screw then pulling to the left.
Step 3
- Loosen the two Phillips #2 screws securing the lamp housing to the television until the screws will swivel vertically.
- These two screws are permanently attached to the lamp housing and cannot be removed completely.
Loosen the two Phillips #2 screws securing the lamp housing to the television until the screws will swivel vertically.
These two screws are permanently attached to the lamp housing and cannot be removed completely.
Step 4
- Using the handle, pull the lamp housing straight back out of the television.
- Do not touch the glass of the lamp with your bare hands. The oil from your fingers can distort the TV image and lead to other issues.
Using the handle, pull the lamp housing straight back out of the television.
Do not touch the glass of the lamp with your bare hands. The oil from your fingers can distort the TV image and lead to other issues.
Step 5
Back Panel
- Remove the following 8 Phillips #1 screws:
- One 22 mm Phillips #1 in the bottom right corner of the back panel.
- One 18 mm Phillips #1 in the top middle of the back panel.
- Six 18 mm Phillips #1 in the rest of the back panel.
Remove the following 8 Phillips #1 screws:
One 22 mm Phillips #1 in the bottom right corner of the back panel.
One 18 mm Phillips #1 in the top middle of the back panel.
Six 18 mm Phillips #1 in the rest of the back panel.
Step 6
- Pull the back panel off of the television by gripping the sides and rotating it down.
Pull the back panel off of the television by gripping the sides and rotating it down.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Herman Chai
Member since: 10/02/2012
196 Reputation
3 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 18-39, Regan Fall 2012
Member of Cal Poly, Team 18-39, Regan Fall 2012
CPSU-REGAN-F12S18G39
4 Members
6 Guides authored