Difficulty

Moderate

Steps

12

Time Required

                          15 - 45 minutes

Sections

2

  • Mitsubishi Diamondpoint NXM76LCD stand disassembly
  • 1 step
  • Display
  • 11 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackMitsubishi Diamondpoint NXM76LCD

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Removing the stand.
  • Lift the black cover off.
  • Remove all 4 Phillips #2 screws.

Lift the black cover off.

Remove all 4 Phillips #2 screws.

1024

Step 2

              Remove the 5 screws
  • Remove the two 24mm Phillips #2 screws.
  • Remove the three 8mm Phillips #2 screws.

Remove the two 24mm Phillips #2 screws.

Remove the three 8mm Phillips #2 screws.

Step 3

              Remove the back panel
  • Lift the back and pry the back off.
  • The panel is held in with clips on the side. It needs a lot of force the take it off.

Lift the back and pry the back off.

The panel is held in with clips on the side. It needs a lot of force the take it off.

Step 4

              Remove the four screws
  • Remove the four 5mm nut screws.

Remove the four 5mm nut screws.

Step 5

              Remove the 5 screws
  • Remove the seven Phillips #1 screws.

Remove the seven Phillips #1 screws.

Step 6

              Remove the front panel
  • Remove the three Phillips #2 screws.
  • Remove the two data/power cables.
  • Remove the two speaker cables.

Remove the three Phillips #2 screws.

Remove the two data/power cables.

Remove the two speaker cables.

Step 7

              Remove the display cable
  • Pull the two tabs.
  • Pull the connector off.

Pull the two tabs.

Pull the connector off.

Step 8

              Remove the power switch
  • Remove the switch cable off.
  • Remove the two Phillips #2 screws.

Remove the switch cable off.

Remove the two Phillips #2 screws.

Step 9

              Remove the display power
  • Remove the four display power cables.
  • These cables are interchangeable.

Remove the four display power cables.

These cables are interchangeable.

Step 10

              Lift the display out
  • Lift the display out.

Lift the display out.

Step 11

              Remove the four screws
  • Remove the four Phillips #2 screws.
  • These screws release the display from its enclosure. Hold the screen when removing these screws.

Remove the four Phillips #2 screws.

These screws release the display from its enclosure. Hold the screen when removing these screws.

Step 12

  • Remember to plug in all the cables on the display.

Remember to plug in all the cables on the display.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Padraic Hoselton

Member since: 08/22/2017

4,027 Reputation

                                      12 Guides authored                  



                       Badges:
                       43







                                                        +40 more badges

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored