Difficulty
Moderate
Steps
9
Time Required
10 - 30 minutes
Sections
2
- MiTM Air Compressors AM1HE0205HD 2014 Safety Precautions
- 2 steps
- Pump Gaskets
- 7 steps
Flags
0
BackMi-T-M Air Compressor AM1-HE02-05HD (2014)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Power off the compressor
- Before you begin, ensure the device is powered down and cool to the touch.
- Ensure the compressor is unplugged.
- Flip the pressure switch lever up to the off position.
Before you begin, ensure the device is powered down and cool to the touch.
Ensure the compressor is unplugged.
Flip the pressure switch lever up to the off position.
1024
Step 2
Drain the air from the compressor
- Pull the ring on the safety release valve away from the compressor tank to drain the air from the compressor.
- Ensure all air is drained from the tank before beginning repairs.
Pull the ring on the safety release valve away from the compressor tank to drain the air from the compressor.
Ensure all air is drained from the tank before beginning repairs.
Step 3
Remove the pump head
- Use a 10 mm socket to remove the four bolts securing the pump head.
- These bolts have washers, take care not to lose them.
Use a 10 mm socket to remove the four bolts securing the pump head.
These bolts have washers, take care not to lose them.
Step 4
- Lift the pump head off of the cylinder and gently set it aside.
- Take care to avoid stressing the hoses connected to the pump head.
- For the rest of this guide, note the order and orientation of everything you remove for correct reassembly.
Lift the pump head off of the cylinder and gently set it aside.
Take care to avoid stressing the hoses connected to the pump head.
For the rest of this guide, note the order and orientation of everything you remove for correct reassembly.
Step 5
Remove the upper valve plate
- Remove the upper valve plate.
- Take care not to lose the small rectangular valves sitting on the plates.
Remove the upper valve plate.
Take care not to lose the small rectangular valves sitting on the plates.
Step 6
Remove the pump head gasket
- Peel the pump head gasket off of the upper valve plate.
- The pump head gasket may have stuck to the bottom of the pump head. If this is the case, remove it from the pump head.
Peel the pump head gasket off of the upper valve plate.
The pump head gasket may have stuck to the bottom of the pump head. If this is the case, remove it from the pump head.
Step 7
Remove the lower valve plate
- Remove the lower valve plate.
Remove the lower valve plate.
Step 8
Remove the valve plate gasket
- Remove the valve plate gasket from the lower valve plate.
- The valve plate gasket may have stuck to the bottom of the upper valve plate. If this is the case, remove it from the upper valve plate.
Remove the valve plate gasket from the lower valve plate.
The valve plate gasket may have stuck to the bottom of the upper valve plate. If this is the case, remove it from the upper valve plate.
Step 9
Remove the cylinder gasket
- Peel the cylinder gasket off of the cylinder.
- The cylinder gasket may have stuck to the bottom of the lower valve plate. If this is the case, remove it from the lower valve plate."
- During reassembly, make sure to install everything in the correct order and orientation. Use the last image in this step or the device diagram for reference.
Peel the cylinder gasket off of the cylinder.
The cylinder gasket may have stuck to the bottom of the lower valve plate. If this is the case, remove it from the lower valve plate."
During reassembly, make sure to install everything in the correct order and orientation. Use the last image in this step or the device diagram for reference.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Adam O'Camb
Member since: 04/11/2015
173,479 Reputation
418 Guides authored
Badges:
39
+36 more badges
