Difficulty
Moderate
Steps
4
Time Required
5 minutes
Sections
2
- Motherboard
- 3 steps
- Screen
- 1 step
Flags
0
BackMio ALPHA 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
This guide would be helpful if you’re trying to replace the screen of your Mio ALPHA 2.
What you need
Step 1
Motherboard
- Remove the four 6.7mm JIS #00 screws from the back cover.
Remove the four 6.7mm JIS #00 screws from the back cover.
1024
Step 2
- Pull off the back cover of the watch
- Use a pair of tweezers to flip up the retaining flap on the ribbon cable ZIF socket.
- Remove the ribbon cable from its socket.
Pull off the back cover of the watch
Use a pair of tweezers to flip up the retaining flap on the ribbon cable ZIF socket.
Remove the ribbon cable from its socket.
Step 3
- Remove the four 3.8mm JIS #00 screws from the motherboard.
- Remove the motherboard with tweezers
Remove the four 3.8mm JIS #00 screws from the motherboard.
Remove the motherboard with tweezers
Step 4
Screen
- Remove the screen using tweezers.
Remove the screen using tweezers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Wong Jun Hua
Member since: 05/21/2018
169 Reputation
2 Guides authored
Badges:
2
Team
IUPUI, Team S1-G3, Harley Spring 2018
Member of IUPUI, Team S1-G3, Harley Spring 2018
IUPUI-HARLEY-S18S1G3
6 Members
8 Guides authored
