Difficulty

Moderate

Steps

3

Time Required

                          3 minutes

Sections

1

  • Motherboard
  • 3 steps

Flags

0

  • BackMio ALPHA 2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

This guide will be able to walk you through the steps to replace your Mio ALPHA 2’s motherboard.

What you need

Step 1

              Motherboard
  • Remove the four 6.7mm JIS #00 screws from the back cover.

Remove the four 6.7mm JIS #00 screws from the back cover.

1024

Step 2

  • Pull off the back cover of the watch
  • Use a pair of tweezers to flip up the retaining flap on the ribbon cable ZIF socket.
  • Remove the ribbon cable from its socket.

Pull off the back cover of the watch

Use a pair of tweezers to flip up the retaining flap on the ribbon cable ZIF socket.

Remove the ribbon cable from its socket.

Step 3

  • Remove the four 3.8mm JIS #00 screws from the motherboard.
  • Remove the motherboard with tweezers

Remove the four 3.8mm JIS #00 screws from the motherboard.

Remove the motherboard with tweezers

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Wong Jun Hua

Member since: 05/21/2018

169 Reputation

                                      2 Guides authored                  



                       Badges:
                       2

Team

                       IUPUI, Team S1-G3, Harley Spring 2018                        

                                                  Member of IUPUI, Team S1-G3, Harley Spring 2018 



                    IUPUI-HARLEY-S18S1G3                     


                                            6 Members                     


                                            8 Guides authored