Difficulty
Moderate
Steps
5
Time Required
15 minutes
Sections
1
- Back Clock Button
- 5 steps
Flags
0
BackMinolta Maxxum STsi
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Clock Button
- Open the back panel by firmly pressing up on the back-cover release on the lower right side of the camera.
Open the back panel by firmly pressing up on the back-cover release on the lower right side of the camera.
1024
Step 2
- Remove the black case by gently lifting it with your fingers and rotating counterclockwise.
Remove the black case by gently lifting it with your fingers and rotating counterclockwise.
Step 3
- Remove the five black Phillips #00 2.5 mm screws from the back panel.
- Also remove the two black Phillips #00 5.0 mm screws from the back panel.
Remove the five black Phillips #00 2.5 mm screws from the back panel.
Also remove the two black Phillips #00 5.0 mm screws from the back panel.
Step 4
- Use the tweezers to carefully peel back the adhesive foam connecting the back panel to the case and remove the panel.
Use the tweezers to carefully peel back the adhesive foam connecting the back panel to the case and remove the panel.
Step 5
- Use the tweezers to carefully peel off the rubber clock button.
Use the tweezers to carefully peel off the rubber clock button.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Jacobe Labog
Member since: 05/02/2015
301 Reputation
3 Guides authored
Badges:
5
+2 more badges
Team
Cal Poly, Team 14-12, Amido Spring 2015
Member of Cal Poly, Team 14-12, Amido Spring 2015
CPSU-AMIDO-S15S14G12
3 Members
7 Guides authored