Difficulty

Moderate

Steps

6

Time Required

                          20 - 40 minutes

Sections

1

  • Motor
  • 6 steps

Flags

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackMilwaukee M18 2606-20

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Motor
  • Remove the seven 18 mm screws, using the T3 Torx Screwdriver, from the handle area of the case.
  • Remove the seven 18 mm screws, using the T3 Torx Screwdriver, from the handle area of the case.

Remove the seven 18 mm screws, using the T3 Torx Screwdriver, from the handle area of the case.

1024

Step 2

  • Remove the four 20 mm screws, using the T3 Torx Screwdriver, from the front of the case.

Remove the four 20 mm screws, using the T3 Torx Screwdriver, from the front of the case.

Step 3

  • Peel back the sticker at the bottom of the drill handle.

Peel back the sticker at the bottom of the drill handle.

Step 4

  • Open the case by sliding the opening tool all the way around the case to pry it apart.

Open the case by sliding the opening tool all the way around the case to pry it apart.

Step 5

  • Lift the motor from the casing.

Lift the motor from the casing.

Step 6

  • Remove the motor from the case and unscrew the two 8mm screws, using the T3 Torx Screwdriver, on the back of the motor.
  • Remove the connected wires.

Remove the motor from the case and unscrew the two 8mm screws, using the T3 Torx Screwdriver, on the back of the motor.

Remove the connected wires.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 4 other contributors 


                    Markus Eldridge

Member since: 09/24/2019

853 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Embry-Riddle Aeronautical University, Team S1-G10, Watkins Fall 2019                        

                                                  Member of Embry-Riddle Aeronautical University, Team S1-G10, Watkins Fall 2019 



                    ERAU-WATKINS-F19S1G10                     


                                            4 Members                     


                                            5 Guides authored