Difficulty
Difficult
Steps
6
Time Required
30 - 50 minutes
Sections
1
- Circuit Board
- 6 steps
Flags
0
BackMilwaukee M18 2606-20
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Circuit Board
- Remove the seven 18 mm screws, using the T3 Torx Screwdriver, from the handle area of the case.
- Remove the two 21 mm screws, using the T3 Torx Screwdriver, from the top of the case.
Remove the seven 18 mm screws, using the T3 Torx Screwdriver, from the handle area of the case.
Remove the two 21 mm screws, using the T3 Torx Screwdriver, from the top of the case.
1024
Step 2
- Remove the four 20 mm screws, using the T3 Torx Screwdriver, from the front of the case.
Remove the four 20 mm screws, using the T3 Torx Screwdriver, from the front of the case.
Step 3
- Peel back the sticker at the bottom of the drill handle.
Peel back the sticker at the bottom of the drill handle.
Step 4
- Open the case by sliding the opening tool all the way around the case to pry it apart.
Open the case by sliding the opening tool all the way around the case to pry it apart.
Step 5
- Remove the 4-pin and 5-pin connector, using the tweezers, from the circuit board.
Remove the 4-pin and 5-pin connector, using the tweezers, from the circuit board.
Step 6
- Desolder all of the wires connected to the circuit board.
- When you take the circuitboard out of the case, watch for a spring that is in the back of the battery contacts as it can fly out.
Desolder all of the wires connected to the circuit board.
When you take the circuitboard out of the case, watch for a spring that is in the back of the battery contacts as it can fly out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Markus Eldridge
Member since: 09/24/2019
853 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
Embry-Riddle Aeronautical University, Team S1-G10, Watkins Fall 2019
Member of Embry-Riddle Aeronautical University, Team S1-G10, Watkins Fall 2019
ERAU-WATKINS-F19S1G10
4 Members
5 Guides authored
Drillbatterycomau - Dec 20, 2021
Reply
Replacement M18 Battery for Milwaukee Power Tool 2606-20
Type: Li-ion
Volt: 18V
Capacity: 5000mAh
Color: Black
Weight: 932g
Dimension: 141.15 x 78.00 x 73.95mm
Milwaukee 2606-20 Power Tool Batteries are made from the highest quality parts and are compatible with the Milwaukee cordless tools. And, this Milwaukee 2606-20 battery can be charged with original battery charger. Go to view more about this battery on https://www.drill-batteries.com/batteryp…