Milwaukee 5262 21 Fan Baffle Replacement Repair Guide

Difficulty

Easy

Steps

8

Time Required

                          25 - 35 minutes            

Sections

2

• Housing Assembly
• 2 steps
• Fan Baffle
• 6 steps

Flags

1

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

• BackMilwaukee 5262-21

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Housing Assembly               

• Remove the ten 19mm T20 Torx screws shown in red.

Remove the ten 19mm T20 Torx screws shown in red.

1024

Step 2

• Remove the red Housing Assembly by lifting it up off of the tool.

Remove the red Housing Assembly by lifting it up off of the tool.

Step 3

              Fan Baffle               

• Now the two 10mm T-10 screws shown in red can be removed.
• Next, remove the two 10mm T-10 screws located on the other side of the tool shown in orange.

Now the two 10mm T-10 screws shown in red can be removed.

Next, remove the two 10mm T-10 screws located on the other side of the tool shown in orange.

Step 4

• Using the metal spudger, remove each brush holder as shown in the images.

Using the metal spudger, remove each brush holder as shown in the images.

Step 5

• Remove the four 37mm T-20 screws shown in red. These screws attach the gear housing to the motor housing.

Remove the four 37mm T-20 screws shown in red. These screws attach the gear housing to the motor housing.

Step 6

• After removing the four screws, pull apart the the two sections.

After removing the four screws, pull apart the the two sections.

Step 7

• Remove the four 12mm screws with a T-15 Torx screwdriver shown in red.
• These screws hold the fan baffle in place.

Remove the four 12mm screws with a T-15 Torx screwdriver shown in red.

These screws hold the fan baffle in place.

Step 8

• Remove the fan baffle by pulling it out.

Remove the fan baffle by pulling it out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Andrew Floyd                     

Member since: 03/08/2019

277 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       UMass Dartmouth, Team S1-G3, Botvin Spring 2019                        

                                                  Member of UMass Dartmouth, Team S1-G3, Botvin Spring 2019 



                    UMASSD-BOTVIN-S19S1G3                     


                                            4 Members                     


                                            6 Guides authored