Difficulty
Moderate
Steps
5
Time Required
Suggest a time??
Sections
2
- Back Cover
- 2 steps
- Motherboard
- 3 steps
Flags
0
BackMid F900
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Using a J00 Phillips-head screwdriver, remove the two screws located at the bottom of the device.
- Screws are 5mm x 1mm in size.
Using a J00 Phillips-head screwdriver, remove the two screws located at the bottom of the device.
Screws are 5mm x 1mm in size.
1024
Step 2
- Use the plastic opening tool to pry off the white back-plate of the device.
Use the plastic opening tool to pry off the white back-plate of the device.
Step 3
Motherboard
- Using a +00 Phillips head screwdriver, remove the screws securing the motherboard to the device housing.
- Screws are 4mm x 1mm in size.
Using a +00 Phillips head screwdriver, remove the screws securing the motherboard to the device housing.
Screws are 4mm x 1mm in size.
Step 4
- Desolder the two black and red wires connected to the motherboard.
- Unclip and remove the ribbon cables attached to the motherboard.
- For soldering help, use the How to Solder and Desolder Connections guide.
Desolder the two black and red wires connected to the motherboard.
Unclip and remove the ribbon cables attached to the motherboard.
For soldering help, use the How to Solder and Desolder Connections guide.
Step 5
- Carefully lift and remove the motherboard from the device housing.
Carefully lift and remove the motherboard from the device housing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Matthew Oliva
Member since: 09/10/2016
364 Reputation
3 Guides authored
Badges:
11
+8 more badges
Team
USF Tampa, Team 6-6, Remmell Fall 2016
Member of USF Tampa, Team 6-6, Remmell Fall 2016
USFT-REMMELL-F16S6G6
3 Members
10 Guides authored