Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
2
- Back Cover
- 2 steps
- Camera
- 2 steps
Flags
0
BackMid F900
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Using a J00 Phillips-head screwdriver, remove the two screws located at the bottom of the device.
- Screws are 5mm x 1mm in size.
Using a J00 Phillips-head screwdriver, remove the two screws located at the bottom of the device.
Screws are 5mm x 1mm in size.
1024
Step 2
- Use the plastic opening tool to pry off the white back-plate of the device.
Use the plastic opening tool to pry off the white back-plate of the device.
Step 3
Camera
- Near the top left of the device, gently unclip the gold ribbon cable by pulling up the black clip holding it in place and removing the ribbon.
Near the top left of the device, gently unclip the gold ribbon cable by pulling up the black clip holding it in place and removing the ribbon.
Step 4
- Remove the old camera by carefully lifting it straight up.
- Place the new camera in its place.
Remove the old camera by carefully lifting it straight up.
Place the new camera in its place.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Jacques Pierre
Member since: 09/07/2016
336 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
USF Tampa, Team 6-6, Remmell Fall 2016
Member of USF Tampa, Team 6-6, Remmell Fall 2016
USFT-REMMELL-F16S6G6
3 Members
10 Guides authored