Difficulty
Moderate
Steps
3
Time Required
10 minutes
Sections
1
- Case
- 3 steps
Flags
0
BackMicrosoft Zune 80
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Case
- Use a metal spudger or Zune opening tool to remove the small silver plastic cap on top of the device.
Use a metal spudger or Zune opening tool to remove the small silver plastic cap on top of the device.
1024
Step 2
- There are two T4 screws under the cap. Remove both with a T4 screwdriver.
- Be careful removing the screws; the screw heads can break very easily.
There are two T4 screws under the cap. Remove both with a T4 screwdriver.
Be careful removing the screws; the screw heads can break very easily.
Step 3
Remove the Casing
- Using a metal spudger or Zune opening tool, remove the aluminum backing starting from the top. There are 5 clips on each side and two on the bottom.
- Be careful not to press the tools in too far; there are exposed cables right inside the edge of the device.
Using a metal spudger or Zune opening tool, remove the aluminum backing starting from the top. There are 5 clips on each side and two on the bottom.
Be careful not to press the tools in too far; there are exposed cables right inside the edge of the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 9 other contributors
turey
Member since: 11/11/2009
357 Reputation
2 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team 6-5, Maness Fall 2009
Member of Cal Poly, Team 6-5, Maness Fall 2009
CPSU-MANESS-F09S6G5
5 Members
5 Guides authored
zippy9765 - Mar 29, 2021
Reply
I have followed these steps but im unable to get the back case off, any tips for a stubborn backing?