Microsoft Surface Pro X Ssd And Sim Card Door Removal Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          10 seconds - 1 minute            

Sections

1

• SSD and SIM Card Door
• 3 steps

Flags

0

• BackMicrosoft Surface Pro X

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Open the kickstand               

• Make sure your Surface Pro X is turned off, and laying screen-side down on a soft surface.
• After turning off your device, make sure to remove the SSD from the Surface before starting any repairs. This will disconnect the battery and prevent damage to the device.
• Lift the kickstand to at least a 90° angle, so that it is perpendicular to the Surface’s screen. The further you open the hinge, the easier it is to access the SSD and SIM card door.

Make sure your Surface Pro X is turned off, and laying screen-side down on a soft surface.

After turning off your device, make sure to remove the SSD from the Surface before starting any repairs. This will disconnect the battery and prevent damage to the device.

Lift the kickstand to at least a 90° angle, so that it is perpendicular to the Surface’s screen. The further you open the hinge, the easier it is to access the SSD and SIM card door.

1024

Step 2

              Open the SSD and SIM card door               

• Insert a SIM card eject tool or a paperclip into the small hole in the bottom right corner of the SSD and SIM card door, located near the bottom right corner of the Surface.
• Press firmly to open the door.

Insert a SIM card eject tool or a paperclip into the small hole in the bottom right corner of the SSD and SIM card door, located near the bottom right corner of the Surface.

Press firmly to open the door.

Step 3

              Remove the SSD and SIM card door               

• Lift the SSD and SIM card door and remove it from the Surface.
• When reinstalling the door, first insert the end of the door with the small tab into the Surface just above the SSD, then lay the rest of the door down.

Lift the SSD and SIM card door and remove it from the Surface.

When reinstalling the door, first insert the end of the door with the small tab into the Surface just above the SSD, then lay the rest of the door down.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Adam O'Camb                     

Member since: 04/11/2015

173,479 Reputation

                                      418 Guides authored                  



                       Badges:
                       39







                                                        +36 more badges