Difficulty
Easy
Steps
4
Time Required
5 - 10 minutes
Sections
1
- Kickstand
- 4 steps
Flags
0
BackMicrosoft Surface Pro 7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Some photos in this guide are from a different model and may contain slight visual discrepancies, but they won’t affect the guide procedure.
What you need
Step 1
Open the kickstand
- Lift the kickstand to expose the hinge screws.
Lift the kickstand to expose the hinge screws.
1024
Step 2
Remove the kickstand screws
- Remove the four 2.7 mm T3 screws—two on each side of the kickstand.
Remove the four 2.7 mm T3 screws—two on each side of the kickstand.
Step 3
Close the kickstand
- Move the kickstand back down to a flat position.
- The hinges are stiff and you may need to use some force to get it down.
Move the kickstand back down to a flat position.
The hinges are stiff and you may need to use some force to get it down.
Step 4
Remove the kickstand
- Remove the kickstand from the back cover.
- There are two adhesive tabs in the middle of the kickstand that disengage most easily when the kickstand is pulled directly downward from the device.
- Be sure to insert these tabs when reinstalling the new kickstand before replacing the screws.
Remove the kickstand from the back cover.
There are two adhesive tabs in the middle of the kickstand that disengage most easily when the kickstand is pulled directly downward from the device.
Be sure to insert these tabs when reinstalling the new kickstand before replacing the screws.
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
Cancel: I did not complete this guide.
Author
Sam Omiotek
Member since: 02/25/2019
55,294 Reputation
288 Guides authored
Badges:
35
+32 more badges
Team
Guide Team
Member of Guide Team
Community
10 Members
9,216 Guides authored
P Best - Dec 20, 2021
Reply
One of the hinges broke on my Surface Pro 6.
I removed the broken hinge, closed the kickstand and duct taped the seam.
I opened the kickstand wide and duct taped the seam.
The single hinge and duct tape seem to be working!
“Spare the duct tape, spoil the job.” - Red Green
Andrea Shaw - Jul 12, 2022
Reply
What are the parts used for this fix?