Difficulty
Moderate
Steps
8
Time Required
10 - 25 minutes
Sections
2
- Back Cover
- 1 step
- Screen
- 7 steps
Flags
0
BackMicrosoft Lumia 640 LTE
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Use your thumb or fingernail on the edge/corner of the phone to pry the back cover off the phone.
Use your thumb or fingernail on the edge/corner of the phone to pry the back cover off the phone.
1024
Step 2
Screen
- Use the tweezers to pull back the sticker, revealing the screw underneath.
- Be careful when removing the screws as they can strip easily.
Use the tweezers to pull back the sticker, revealing the screw underneath.
Be careful when removing the screws as they can strip easily.
Step 3
- Use a T4 Torx driver to remove the screws in the four corners, along with the two in the middle left side (six total).
Use a T4 Torx driver to remove the screws in the four corners, along with the two in the middle left side (six total).
Step 4
- Using the T4 Torx driver, unscrew the two screws.
- Keep these screws separate from the screws from back of the phone to ensure that the right screws go where they belong.
Using the T4 Torx driver, unscrew the two screws.
Keep these screws separate from the screws from back of the phone to ensure that the right screws go where they belong.
Step 5
- Use a plastic opening tool to separate the screen from the back plastic casing
- Use tweezers to release the clip on the side of device, and remove the back of the phone.
Use a plastic opening tool to separate the screen from the back plastic casing
Use tweezers to release the clip on the side of device, and remove the back of the phone.
Step 6
- Using the tweezers or a spudger, pull the gold tab up gently.
- Using tweezers or a spudger, lift the white connector up gently to completely detach the screen from the phone.
- For motherboard replacement, skip to Step 11 after finishing this step.
Using the tweezers or a spudger, pull the gold tab up gently.
Using tweezers or a spudger, lift the white connector up gently to completely detach the screen from the phone.
For motherboard replacement, skip to Step 11 after finishing this step.
Step 7
- Using a plastic opening tool to carefully get under the gold strip.
- Use tweezers to pull up the camera.
- Use tweezers to pull up on the depth sensor.
- This is held in by a strong adhesive.
Using a plastic opening tool to carefully get under the gold strip.
Use tweezers to pull up the camera.
Use tweezers to pull up on the depth sensor.
This is held in by a strong adhesive.
Step 8
- Use a plastic opening tool to pry up the ear speaker.
- This is held in by strong adhesive.
Use a plastic opening tool to pry up the ear speaker.
This is held in by strong adhesive.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Nick Emmert
Member since: 09/27/2018
637 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
Linn Benton Community College, Team S1-G2, Johnson Fall 2018
Member of Linn Benton Community College, Team S1-G2, Johnson Fall 2018
LBCC-JOHNSON-F18S1G2
5 Members
10 Guides authored