Difficulty
Moderate
Steps
7
Time Required
15 minutes
Sections
3
- Back Cover / Rear Case
- 3 steps
- Logic board
- 2 steps
- Charging Port Dock and Microphone Flex
- 2 steps
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackMicrosoft Lumia 535
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
RM-1090 / RM-1091/ RM-1089 / RM-1092
If you have a problem with the charging port or the microphone you have to change Microsoft Lumia 535 Charging Port Dock and Microphone Flex.
What you need
Video Overview
Step 1
Back Cover / Rear Case
- Turn off the phone.
- Remove the battery and any SIM and memory cards.
Turn off the phone.
Remove the battery and any SIM and memory cards.
1024
Step 2
- With a screwdriver Torx T4 remove the 9x screws.
With a screwdriver Torx T4 remove the 9x screws.
Step 3
- With a plastic opening tool separate the back cover from the middle frame.
With a plastic opening tool separate the back cover from the middle frame.
Step 4
Logic board
- Disconnect:
- Touch screen flex cable
- LCD Display flex cable
- Charging Dock board flex cable - remove the foam and tape, then flip up the black lock before easing out the flex.
- Coaxial antena cable - take your time here, be sure to pull the metal connector and not the cable or you risk pulling the cable from the connector.
- Remove the 2x Torx T4 screws.
Disconnect:
Touch screen flex cable
LCD Display flex cable
Charging Dock board flex cable - remove the foam and tape, then flip up the black lock before easing out the flex.
Coaxial antena cable - take your time here, be sure to pull the metal connector and not the cable or you risk pulling the cable from the connector.
Remove the 2x Torx T4 screws.
Step 5
- Insert wisdom here.
Insert wisdom here.
Step 6
Charging Port Dock and Microphone Flex
- Disconnect the coaxial antenna cable.
- The cable is attached at several points to the frame and to the board. Gently remove it.
Disconnect the coaxial antenna cable.
The cable is attached at several points to the frame and to the board. Gently remove it.
Step 7
- The board is glued to the main frame by adhesive tape.
- Use a hot gun or hair dryer and warm the board.
- Now you can easy separate the board from the main frame.
- For the separation process use only plastic tools.
The board is glued to the main frame by adhesive tape.
Use a hot gun or hair dryer and warm the board.
Now you can easy separate the board from the main frame.
For the separation process use only plastic tools.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
16 other people completed this guide.
Author
with 1 other contributor
ZFix
Member since: 12/09/2013
187,195 Reputation
330 Guides authored
Badges:
35
+32 more badges
Team
Master Techs
Member of Master Techs
Community
310 Members
1,168 Guides authored
saurabh pawar - Apr 14, 2018
Reply
where can i get charging port for microsoft lumia 540