Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

3

  • Back Cover
  • 2 steps
  • Logic board
  • 2 steps
  • LCD Display
  • 3 steps

Flags

4

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackMicrosoft Lumia 435

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Back Cover
  • Switch off the phone.
  • Remove the battery and any inserted SIM and memory cards.
  • Use a screwdriver Torx T6 and remove the 4x black screws.

Switch off the phone.

Remove the battery and any inserted SIM and memory cards.

Use a screwdriver Torx T6 and remove the 4x black screws.

1024

Step 2

  • There are several plastic locking clips hold the back cover to the frame.
  • Use a tool with a sharp edge to unlock them and a plastic tool to separate the back cover.

There are several plastic locking clips hold the back cover to the frame.

Use a tool with a sharp edge to unlock them and a plastic tool to separate the back cover.

Step 3

              Logic board
  • Unhook:
  • the touch screen flex cable
  • the LCD Display flex cable
  • Use a plastic tool lift up and remove the Logic board.

Unhook:

the touch screen flex cable

the LCD Display flex cable

Use a plastic tool lift up and remove the Logic board.

Step 4

  • This is the logic board / main board - a front and rear view.

This is the logic board / main board - a front and rear view.

Step 5

              LCD Display
  • The Display metal shield is locked to the frame by 4x locking clips.
  • Use a tool with a sharp tip and careful unlock them and remove the shield.

The Display metal shield is locked to the frame by 4x locking clips.

Use a tool with a sharp tip and careful unlock them and remove the shield.

Step 6

  • The display is stuck tovthe touch screen glass with a double-sided adhesive tape.
  • Use a hair dryer or hot air gun and worm the glass to make adhesive soften.
  • Distort the frame a little and use a thin plastic tool to separate the display from the frame.

The display is stuck tovthe touch screen glass with a double-sided adhesive tape.

Use a hair dryer or hot air gun and worm the glass to make adhesive soften.

Distort the frame a little and use a thin plastic tool to separate the display from the frame.

Step 7

  • The display is very fragile, do the separation very carefully.

The display is very fragile, do the separation very carefully.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    ZFix

Member since: 12/09/2013

187,195 Reputation

                                      330 Guides authored                  



                       Badges:
                       35







                                                        +32 more badges

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored