Difficulty

Difficult

Steps

7

Time Required

Suggest a time??

Sections

3

  • Back Cover
  • 2 steps
  • Logic board
  • 2 steps
  • LCD Display
  • 3 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackMicrosoft Lumia 435

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Video Overview

Step 1

              Back Cover
  • Switch off the phone.
  • Remove the battery and any inserted SIM and memory cards.
  • Use a screwdriver Torx T6 and remove the 4x black screws.

Switch off the phone.

Remove the battery and any inserted SIM and memory cards.

Use a screwdriver Torx T6 and remove the 4x black screws.

1024

Step 2

  • There are several plastic locking clips hold the back cover to the frame.
  • Use a tool with a sharp edge to unlock them and a plastic tool to separate the back cover.

There are several plastic locking clips hold the back cover to the frame.

Use a tool with a sharp edge to unlock them and a plastic tool to separate the back cover.

Step 3

              Logic board
  • Unhook:
  • the touch screen flex cable
  • the LCD Display flex cable
  • Use a plastic tool lift up and remove the Logic board.

Unhook:

the touch screen flex cable

the LCD Display flex cable

Use a plastic tool lift up and remove the Logic board.

Step 4

  • This is the logic board / main board - a front and rear view.

This is the logic board / main board - a front and rear view.

Step 5

              LCD Display
  • The Display metal shield is locked to the frame by 4x locking clips.
  • Use a tool with a sharp tip and careful unlock them and remove the shield.

The Display metal shield is locked to the frame by 4x locking clips.

Use a tool with a sharp tip and careful unlock them and remove the shield.

Step 6

  • The display is stuck tovthe touch screen glass with a double-sided adhesive tape.
  • Use a hair dryer or hot air gun and worm the glass to make adhesive soften.
  • Distort the frame a little and use a thin plastic tool to separate the display from the frame.

The display is stuck tovthe touch screen glass with a double-sided adhesive tape.

Use a hair dryer or hot air gun and worm the glass to make adhesive soften.

Distort the frame a little and use a thin plastic tool to separate the display from the frame.

Step 7

  • The display is very fragile, do the separation very carefully.

The display is very fragile, do the separation very carefully.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 2 other contributors 


                    ZFix

Member since: 12/09/2013

187,195 Reputation

                                      330 Guides authored                  



                       Badges:
                       35







                                                        +32 more badges

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored

mohammad7salaheddin - Feb 21, 2016

Reply

كيف اقوم بفك الهاتف وفحص الخلل الذي يوجد فيه .اعني ان هاتفي لا يقبل العمل اظن انه محروق كيف افحصه ؟

How do I remove the phone and to inspect the defect in which the .ani there is a telephone that does not accept the work I think it’s seared how it checked ?

mario rados - Apr 20, 2018

Reply

I am pretty sure he didn’t use ifixit stuff to fix the screen, lmao