Difficulty
Easy
Steps
4
Time Required
10 - 30 minutes
Sections
1
- Battery
- 4 steps
Flags
2
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackXiaomi Mi 8 Explorer
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- As per usual, heat the glue to soften it, and use picks to cut.
- I found that it was pretty easy to get in there by using a suction cup with a small amount of pressure along with a Halberd spudger to get it started.
As per usual, heat the glue to soften it, and use picks to cut.
I found that it was pretty easy to get in there by using a suction cup with a small amount of pressure along with a Halberd spudger to get it started.
1024
Step 2
- Next step is to remove the screws that keep the plastic back plate on. You’ll find:
- Pentalobe P2 screw (x9)
- NFC Module
- Use a spudger to remove the plastic plate, being careful with the NFC module (form what I saw, it doesn’t detach form the plate, and even if it does, it’s just easier to keep it together
Next step is to remove the screws that keep the plastic back plate on. You’ll find:
Pentalobe P2 screw (x9)
NFC Module
Use a spudger to remove the plastic plate, being careful with the NFC module (form what I saw, it doesn’t detach form the plate, and even if it does, it’s just easier to keep it together
Step 3
- Unclip the battery connector and remove the sticker over the battery, to see the battery in all its glory!
Unclip the battery connector and remove the sticker over the battery, to see the battery in all its glory!
Step 4
- Remove the battery, unlike the Original Mi 8 Pro, I didn’t find any glue tabs to remove the battery, so I used a mix of my Halberd Spudger, and a plastic card to remove the battery.
- Insert the replacement battery, and test the phone.
Remove the battery, unlike the Original Mi 8 Pro, I didn’t find any glue tabs to remove the battery, so I used a mix of my Halberd Spudger, and a plastic card to remove the battery.
Insert the replacement battery, and test the phone.
Once ready, follow steps backwards as normal!
Cancel: I did not complete this guide.
Author
with 1 other contributor
J.McGaley
Member since: 05/28/2021
124 Reputation
1 Guide authored
Badges:
2