Difficulty

Moderate

Steps

6

Time Required

                          1 hour

Sections

1

  • Screen
  • 6 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Missed a Step

Oops! This guide is currently missing some important steps.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackMeizu MX3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Screen
  • Remove the back panel, and unscrew everything to remove the second back panel. Some screw are longer than other. But I mixed them without issue. Here I saw the solution for the network issue: the little contacts between motherboard and screen were bended.
  • I removed the battery, but I think it’s not mandatory. If you do, be careful, it’s very well glued, and there is some wires behind.

Remove the back panel, and unscrew everything to remove the second back panel. Some screw are longer than other. But I mixed them without issue. Here I saw the solution for the network issue: the little contacts between motherboard and screen were bended.

I removed the battery, but I think it’s not mandatory. If you do, be careful, it’s very well glued, and there is some wires behind.

1024

Step 2

  • Unplug all the connectors to the motherboard, included the two antennas The small flat ribbon in the corner is a little tricky, you have to switch the black part of the connector, not the white one like some other similar I saw before.

Unplug all the connectors to the motherboard, included the two antennas The small flat ribbon in the corner is a little tricky, you have to switch the black part of the connector, not the white one like some other similar I saw before.

Step 3

  • Remove the jack connector, removes the lasts screws (mark the placement for later)
  • Remove the motherboard, starting by the upper part: There is a last connector to unplug at the bottom, behind.

Remove the jack connector, removes the lasts screws (mark the placement for later)

Remove the motherboard, starting by the upper part: There is a last connector to unplug at the bottom, behind.

Step 4

  • Now, remove the old screen. It’s glued, try to lift a corner, then with a plastic tool, unglue everything.
  • Clean the glue inside the metal part.

Now, remove the old screen. It’s glued, try to lift a corner, then with a plastic tool, unglue everything.

Clean the glue inside the metal part.

Step 5

  • Put some adhesive (or some glue?) I used thin double-sided tape I had cut the right shape. the side of the screen are less than 1mm wide, it’s hard to do here…

Put some adhesive (or some glue?) I used thin double-sided tape I had cut the right shape. the side of the screen are less than 1mm wide, it’s hard to do here…

Step 6

  • Put the screen in the frame, and put everything back in place.
  • Voila!

Put the screen in the frame, and put everything back in place.

Voila!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 2 other contributors 


                    Feyris

Member since: 04/10/2015

135 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges