Difficulty
Moderate
Steps
11
Time Required
20 minutes
Sections
2
- Motherboard
- 9 steps
- Battery Port
- 2 steps
Flags
0
BackMaze Speed SSB-508
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motherboard
- Remove the back cover by inserting the plastic opening tool at the bottom left corner of the device.
Remove the back cover by inserting the plastic opening tool at the bottom left corner of the device.
1024
Step 2
- Remove fifteen 2mm Phillips #00 screws.
Remove fifteen 2mm Phillips #00 screws.
Step 3
- Lift the plastic opening tool up at the bottom left corner to create the gap.
- Repeat this through all corners to remove the internal casing.
Lift the plastic opening tool up at the bottom left corner to create the gap.
Repeat this through all corners to remove the internal casing.
Step 4
- Unscrew the 2mm screw at the bottom right of the motherboard.
- Remove the internal antenna casing from the motherboard.
Unscrew the 2mm screw at the bottom right of the motherboard.
Remove the internal antenna casing from the motherboard.
Step 5
- Unplug the speaker at the top of the motherboard.
Unplug the speaker at the top of the motherboard.
Step 6
- Desolder the gold ribbon that is connected to the motherboard at the bottom left corner.
Desolder the gold ribbon that is connected to the motherboard at the bottom left corner.
Step 7
- Use tweezers to remove cable from the ZIF connectors located at the bottom left of the motherboard.
- Use the tweezers to remove the second cable from ZIF connector located to the right of the speaker that you unplugged in step five.
- ZIF connector stands for Zero Insertion Force. Flip the small locking tap before removing the cable.
Use tweezers to remove cable from the ZIF connectors located at the bottom left of the motherboard.
Use the tweezers to remove the second cable from ZIF connector located to the right of the speaker that you unplugged in step five.
ZIF connector stands for Zero Insertion Force. Flip the small locking tap before removing the cable.
Step 8
- At this point, the motherboard should be able to be lifted up from the bottom.
- Use the tweezers to dislodge the speaker.
- After the speaker is dislodged, flip the motherboard up so that you can see the cable.
- Using a soldering tool, desolder the cable from the back of the motherboard.
At this point, the motherboard should be able to be lifted up from the bottom.
Use the tweezers to dislodge the speaker.
After the speaker is dislodged, flip the motherboard up so that you can see the cable.
Using a soldering tool, desolder the cable from the back of the motherboard.
Step 9
- Remove the motherboard from the back.
Remove the motherboard from the back.
Step 10
Battery Port
- Flip the motherboard upside down and you will see the battery port connected to the motherboard with 5 different soldered places.
- Use the pliers to hold the motherboard and desolder the 5 places which are connected to the motherboard.
Flip the motherboard upside down and you will see the battery port connected to the motherboard with 5 different soldered places.
Use the pliers to hold the motherboard and desolder the 5 places which are connected to the motherboard.
Step 11
- Use the tweezers to pull out the battery port.
- Then, replace it with the new battery port.
Use the tweezers to pull out the battery port.
Then, replace it with the new battery port.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 7 other contributors
Jun Soo Kim
Member since: 07/08/2019
361 Reputation
3 Guides authored
Badges:
5
+2 more badges
Team
Embry-Riddle Aeronautical University, Team S3-G3, Watkins Summer 2019
Member of Embry-Riddle Aeronautical University, Team S3-G3, Watkins Summer 2019
ERAU-WATKINS-SU19S3G3
4 Members
5 Guides authored