Difficulty
Moderate
Steps
8
Time Required
20 minutes
Sections
1
- Drive Belt
- 8 steps
Flags
3
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Missed a Step
Oops! This guide is currently missing some important steps.
BackMaytag Bravos Quiet Series 300
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Drive Belt
- Disconnect the power supply from your Maytag Bravos washer. Following this, pull the device approximately 2 feet away from the wall.
Disconnect the power supply from your Maytag Bravos washer. Following this, pull the device approximately 2 feet away from the wall.
1024
Step 2
- This step may be easier with two people.
- Gently rest the washing machine against a wall or hard surface to keep it slightly elevated. This is important as you will need access to the underside of the machine for the following step.
This step may be easier with two people.
Gently rest the washing machine against a wall or hard surface to keep it slightly elevated. This is important as you will need access to the underside of the machine for the following step.
Step 3
- Have your 1/4-inch drive ratchet ready for the following step.
Have your 1/4-inch drive ratchet ready for the following step.
Step 4
- Have someone carefully watch over the washing machine and make sure it is firmly rested against the wall to prevent injury.
- Under the washing machine you will see a plastic cover over the drive belt. To remove this use your 1/4" drive ratchet.
Have someone carefully watch over the washing machine and make sure it is firmly rested against the wall to prevent injury.
Under the washing machine you will see a plastic cover over the drive belt. To remove this use your 1/4" drive ratchet.
Step 5
- Following the removal of the cover, place the bolts inside the cover and place to the side somewhere safe.
Following the removal of the cover, place the bolts inside the cover and place to the side somewhere safe.
Step 6
- Following removal of the cover you will see the drive belt roped around two cogs.
- The belt is fairly elastic and easy to remove. Remove the drive belt gently and replace with the new belt.
Following removal of the cover you will see the drive belt roped around two cogs.
The belt is fairly elastic and easy to remove. Remove the drive belt gently and replace with the new belt.
Step 7
- Reattach the drive belt cover using your 1/4" drive ratchet.
Reattach the drive belt cover using your 1/4" drive ratchet.
Step 8
- Gently rest the washing machine back against the wall and reconnect all power supply.
Gently rest the washing machine back against the wall and reconnect all power supply.
To replace your drive belt in your Maytag Bravos washer follow this simple 8 step guide.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Reilly Farr
Member since: 02/02/2020
223 Reputation
1 Guide authored
Badges:
7
+4 more badges
Team
USF Sarasota-Manatee, Team S1-G1, Stewart Spring 2020
Member of USF Sarasota-Manatee, Team S1-G1, Stewart Spring 2020
USFSM-STEWART-S20S1G1
23 Members
24 Guides authored
palmer910 - Oct 1, 2022
Reply
What’s the trick of getting the new belt on the wheels?