Difficulty
Moderate
Steps
6
Time Required
Suggest a time??
Sections
1
- Motherboard
- 6 steps
Flags
5
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackMaylong M-295
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Motherboard
- Use a PH 00 Phillips head screwdriver to remove the screws from the bottom of the tablet.
Use a PH 00 Phillips head screwdriver to remove the screws from the bottom of the tablet.
1024
Step 2
- Caution: Before completely removing the cover take note of the wires connecting the speaker to the motherboard. Do not pull off the cover too forcefully or else the wires will become unsoldered from the motherboard. (Refer to picture 1)
- Use a plastic pry tool to gently pry open the tablet by inserting the plier in between the pink back cover and black screen frame.
- Be sure to go around all corners of the tablet carefully.
- You may need insert a second pry tool close to the first to keep the cover from closing as you move around the edges.
Caution: Before completely removing the cover take note of the wires connecting the speaker to the motherboard. Do not pull off the cover too forcefully or else the wires will become unsoldered from the motherboard. (Refer to picture 1)
Use a plastic pry tool to gently pry open the tablet by inserting the plier in between the pink back cover and black screen frame.
Be sure to go around all corners of the tablet carefully.
You may need insert a second pry tool close to the first to keep the cover from closing as you move around the edges.
Step 3
- Slowly flip open the pink back cover and gently remove the speakers from it with a plastic plier.
Slowly flip open the pink back cover and gently remove the speakers from it with a plastic plier.
Step 4
- Use a PH 00 Phillips head screwdriver to remove the seven screws from around the perimeter of the interior screen frame.
- 3 screws are located on the bottom of the motherboard (as indicated in picture 1)
- 4 screws are located in brackets around the silver screen plate (as indicated in picture 2).
- Note: The brackets (small black plastic pieces) will become loose when the screws are taken out and then can easily be removed.
Use a PH 00 Phillips head screwdriver to remove the seven screws from around the perimeter of the interior screen frame.
3 screws are located on the bottom of the motherboard (as indicated in picture 1)
4 screws are located in brackets around the silver screen plate (as indicated in picture 2).
Note: The brackets (small black plastic pieces) will become loose when the screws are taken out and then can easily be removed.
Step 5
- Unsolder wires that are connected to the motherboard by pressing the solder tool to the flux and liquifying it. Then the wire can easily be pulled away from the motherboard.
Unsolder wires that are connected to the motherboard by pressing the solder tool to the flux and liquifying it. Then the wire can easily be pulled away from the motherboard.
Step 6
- Remove motherboard by pulling up and out from the body of the tablet.
Remove motherboard by pulling up and out from the body of the tablet.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Sali Kamara
Member since: 09/30/2015
64 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
Ohio State, Team 2-4, Garvin Fall 2015
Member of Ohio State, Team 2-4, Garvin Fall 2015
OSU-GARVIN-F15S2G4
4 Members
1 Guide authored
