Difficulty
Difficult
Steps
7
Time Required
10 minutes
Sections
1
- Front Facing Camera
- 7 steps
Flags
4
Grammar Police
Embrace your inner English teacher and help improve this guide’s grammar!
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
Slice and Dice
The steps in this guide should be split up and made into a series of prerequisite guides.
Step Trimmer
This guide has unnecessary steps. Trim them to be more concise!
BackMatsunichi MarquisPad MP977
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Front Facing Camera
- Remove the two screws using a PH #00 Phillips head screw driver.
Remove the two screws using a PH #00 Phillips head screw driver.
1024
Step 2
- Then, place the device face down on a flat surface.
- Insert one of the wide tipped, plastic opening tools into the top of the left speaker slot.
- Be sure not to puncture the covering of the speaker.
- After, pry the back plate open and slide the tool in a clockwise direction, moving it along the opening between the device and the back plate until you reach the power button.
Then, place the device face down on a flat surface.
Insert one of the wide tipped, plastic opening tools into the top of the left speaker slot.
Be sure not to puncture the covering of the speaker.
After, pry the back plate open and slide the tool in a clockwise direction, moving it along the opening between the device and the back plate until you reach the power button.
Step 3
- Insert opening tool into the right speaker slot.
- Then, pry open the back plate of the device , and slide the tool counter clockwise along the device until you reach the charging port.
Insert opening tool into the right speaker slot.
Then, pry open the back plate of the device , and slide the tool counter clockwise along the device until you reach the charging port.
Step 4
- Remove the back plate and place it to the side of the device.
Remove the back plate and place it to the side of the device.
Step 5
- With the same screw driver, PH #00 Phillips head, remove the seven screws holding in the motherboard.
- Place the screws somewhere safe where they wont fall.
With the same screw driver, PH #00 Phillips head, remove the seven screws holding in the motherboard.
Place the screws somewhere safe where they wont fall.
Step 6
- Pull the camera optic fiber out of the slot it is in causing the flap to pop right open.
- Be sure not to damage the camera port.
Pull the camera optic fiber out of the slot it is in causing the flap to pop right open.
Be sure not to damage the camera port.
Step 7
- Last, Insert the new camera into the pinhole camera slot.
Last, Insert the new camera into the pinhole camera slot.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 8 other contributors
Kathryn Sherlock
Member since: 03/24/2015
127 Reputation
1 Guide authored
Badges:
10
+7 more badges
Team
UMass Dartmouth, Team 4-1, Vijaybhaskar Spring 2015
Member of UMass Dartmouth, Team 4-1, Vijaybhaskar Spring 2015
UMASSD-VIJAYBHASKAR-S15S4G1
3 Members
6 Guides authored