Difficulty

Moderate

Steps

5

Time Required

                          15 minutes

Sections

1

  • Battery
  • 5 steps

Flags

4

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Missed a Step

Oops! This guide is currently missing some important steps.

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackMatsunichi MarquisPad MP977

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Remove the two screws using a Phillips #00 screwdriver.

Remove the two screws using a Phillips #00 screwdriver.

1024

Step 2

  • Place the device face down on a flat surface.
  • Insert one of the wide-tipped, plastic opening tools into the top of the left speaker slot.
  • Be sure to avoid puncturing the covering of the speaker.
  • Pry the back plate open and slide the tool in a clockwise direction, moving it along the opening between the device and its back plate until you reach the power button.

Place the device face down on a flat surface.

Insert one of the wide-tipped, plastic opening tools into the top of the left speaker slot.

Be sure to avoid puncturing the covering of the speaker.

Pry the back plate open and slide the tool in a clockwise direction, moving it along the opening between the device and its back plate until you reach the power button.

Step 3

  • Insert the opening tool into the right speaker slot.
  • Pry open the back plate, and slide the tool counterclockwise along the device until you reach the charging port.

Insert the opening tool into the right speaker slot.

Pry open the back plate, and slide the tool counterclockwise along the device until you reach the charging port.

Step 4

  • Remove the back plate and place it to the side.

Remove the back plate and place it to the side.

Step 5

  • Detach the battery from the motherboard.

Detach the battery from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 6 other contributors 


                    Evan Campbell

Member since: 03/24/2015

88 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team 4-1, Vijaybhaskar Spring 2015                        

                                                  Member of UMass Dartmouth, Team 4-1, Vijaybhaskar Spring 2015 



                    UMASSD-VIJAYBHASKAR-S15S4G1                     


                                            3 Members                     


                                            6 Guides authored