Difficulty
Easy
Steps
5
Time Required
5 - 10 minutes
Sections
1
- Battery
- 5 steps
Flags
0
BackMatsunichi M97 9 inch
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Open the micro SD cover located on the back of the device.
Open the micro SD cover located on the back of the device.
1024
Step 2
- Using the Phillips #00 screwdriver, remove the two 4mm screws next to the micro SD port.
Using the Phillips #00 screwdriver, remove the two 4mm screws next to the micro SD port.
Step 3
- Use the iFixit opening tool to pry off the back cover of the device.
- The volume buttons and the lock switch will come loose when the back comes off.
Use the iFixit opening tool to pry off the back cover of the device.
The volume buttons and the lock switch will come loose when the back comes off.
Step 4
- Use a pair of tweezers to disconnect the battery from the motherboard.
Use a pair of tweezers to disconnect the battery from the motherboard.
Step 5
- Carefully unstick the battery from the frame using the spudger.
- Do not bend or puncture the battery during removal.
Carefully unstick the battery from the frame using the spudger.
Do not bend or puncture the battery during removal.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
William Wright
Member since: 01/16/2020
121 Reputation
1 Guide authored
Badges:
3
Team
Embry-Riddle Aeronautical University, Team S7-G8, Rauch Spring 2020
Member of Embry-Riddle Aeronautical University, Team S7-G8, Rauch Spring 2020
ERAU-RAUCH-S20S7G8
4 Members
5 Guides authored