Difficulty
Moderate
Steps
4
Time Required
1 hour
Sections
1
- Leg & strut
- 4 steps
Flags
2
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackManfrotto Ranker Stand APoS mondification
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rivet Removal
- Using a drill, drill out enough of the rivet head so that the rivet may be removed.
- If the rivet spins, use pliers or a flat head screw driver to hold the rivet in place
Using a drill, drill out enough of the rivet head so that the rivet may be removed.
If the rivet spins, use pliers or a flat head screw driver to hold the rivet in place
1024
Step 2
Rivet Removal
- Once you have dissembled the legs and spreader struts
Once you have dissembled the legs and spreader struts
Step 3
Cut down the spreader strut
- Cut spreader strut to 200mm
- use a punch to mark the centre of the spreader strut
- drill 6mm hole through spreader strut
- round end off to replicate the original end, with a file
Cut spreader strut to 200mm
use a punch to mark the centre of the spreader strut
drill 6mm hole through spreader strut
round end off to replicate the original end, with a file
Step 4
Cut legs down
- Legs should be cut down to 400 mm
Legs should be cut down to 400 mm
Cancel: I did not complete this guide.
Author
with 1 other contributor
nickjvturner
Member since: 02/23/2013
101 Reputation
1 Guide authored
Badges:
1