Makita Xph01 Gear Select Switch Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

Outer Casing
4 steps
Gear Select Switch
3 steps

Flags

BackMakita XPH01
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Outer Casing

Hold the drill upright with the back panel facing you.
Unscrew the two 18 mm screws from the back panel using a Phillips PH2 screwdriver.

Hold the drill upright with the back panel facing you.

Unscrew the two 18 mm screws from the back panel using a Phillips PH2 screwdriver.

1024

Step 2

Apply slight pressure to the sides of the backplate and pull away from the drill.

Apply slight pressure to the sides of the backplate and pull away from the drill.

Step 3

Unscrew the nine 18 mm screws from the outer casing using a Phillips PH2 screwdriver.

Unscrew the nine 18 mm screws from the outer casing using a Phillips PH2 screwdriver.

Step 4

Apply slight pressure to the sides of the outer casing and pull away from the drill.

Apply slight pressure to the sides of the outer casing and pull away from the drill.

Step 5

              Gear Select Switch

Pull the silver metal clip located towards the back of drill away from the motor assembly.

Pull the silver metal clip located towards the back of drill away from the motor assembly.

Step 6

Gently grip the front of the motor assembly and pull it out of the plastic casing.
The wires are still connected to the back of the motor assembly, so use caution when pulling the motor out. Failing to do this will result in parts falling off the back of the motor

Gently grip the front of the motor assembly and pull it out of the plastic casing.

The wires are still connected to the back of the motor assembly, so use caution when pulling the motor out. Failing to do this will result in parts falling off the back of the motor

Step 7

Push gear select switch forward.
Lift the gear select switch to separate it from the motor assembly.

Push gear select switch forward.

Lift the gear select switch to separate it from the motor assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 2 other contributors

                    Eric Herwatt

Member since: 10/05/2016

945 Reputation

                                      7 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team 15-4, Livingston Fall 2016                        

                                                  Member of Cal Poly, Team 15-4, Livingston Fall 2016 



                    CPSU-LIVINGSTON-F16S15G4                     


                                            4 Members                     


                                            7 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team