Difficulty
Moderate
Steps
9
Time Required
10 minutes
Sections
3
- Battery
- 3 steps
- Outer Casing
- 4 steps
- Forward/Reverse Switch
- 2 steps
Flags
0
BackMakita XPH01
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Hold the drill upright.
- Place your finger on the white battery-release button.
Hold the drill upright.
Place your finger on the white battery-release button.
1024
Step 2
- Press and hold the white release button located on the front of the battery.
Press and hold the white release button located on the front of the battery.
Step 3
- Slide the battery forward while pressing down on the white battery-release button.
Slide the battery forward while pressing down on the white battery-release button.
Step 4
Outer Casing
- Hold the drill upright with the back panel facing you.
- Unscrew the two 18 mm screws from the back panel using a Phillips PH2 screwdriver.
Hold the drill upright with the back panel facing you.
Unscrew the two 18 mm screws from the back panel using a Phillips PH2 screwdriver.
Step 5
- Apply slight pressure to the sides of the backplate and pull away from the drill.
Apply slight pressure to the sides of the backplate and pull away from the drill.
Step 6
- Unscrew the nine 18 mm screws from the outer casing using a Phillips PH2 screwdriver.
Unscrew the nine 18 mm screws from the outer casing using a Phillips PH2 screwdriver.
Step 7
- Apply slight pressure to the sides of the outer casing and pull away from the drill.
Apply slight pressure to the sides of the outer casing and pull away from the drill.
Step 8
Forward/Reverse Switch
- Pull the black trigger assembly away from the drill.
Pull the black trigger assembly away from the drill.
Step 9
- Grab onto the forward/reverse switch.
- Gently pull the forward/reverse switch to separate it from the trigger assembly.
Grab onto the forward/reverse switch.
Gently pull the forward/reverse switch to separate it from the trigger assembly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Eric Herwatt
Member since: 10/05/2016
945 Reputation
7 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 15-4, Livingston Fall 2016
Member of Cal Poly, Team 15-4, Livingston Fall 2016
CPSU-LIVINGSTON-F16S15G4
4 Members
7 Guides authored
