Difficulty
Easy
Steps
5
Time Required
10 - 20 minutes
Sections
3
- Sprocket Guard
- 2 steps
- Chain and Guide Bar
- 1 step
- Chain Brake Cover
- 2 steps
Flags
0
BackMakita Chainsaw EA6100PR (2017)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove the sprocket guard plate
- Use a 13 mm socket to remove the two nuts securing the sprocket guard plate.
Use a 13 mm socket to remove the two nuts securing the sprocket guard plate.
1024
Step 2
- Remove the sprocket guard plate.
Remove the sprocket guard plate.
Step 3
Remove the chain and guide bar
- If the chainsaw has a chain and guide bar installed, follow the manufacturer’s instructions and remove them before proceeding.
- During reassembly, if you are reinstalling the chain and guide bar, follow the manufacturers instructions on proper chain tensioning techniques.
If the chainsaw has a chain and guide bar installed, follow the manufacturer’s instructions and remove them before proceeding.
During reassembly, if you are reinstalling the chain and guide bar, follow the manufacturers instructions on proper chain tensioning techniques.
Step 4
Remove the chain brake cover
- Remove the four 12 mm long T27 screws securing the chain brake cover.
Remove the four 12 mm long T27 screws securing the chain brake cover.
Step 5
- Remove the chain brake cover.
Remove the chain brake cover.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Arthur Shi
Member since: 01/03/2018
211,865 Reputation
442 Guides authored
Badges:
46
+43 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,769 Guides authored
