Difficulty
Very difficult
Steps
7
Time Required
Suggest a time??
Sections
1
- Rear Axle
- 7 steps
Flags
0
BackMaisto Rock Crawler
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Axle
- Flip the R/C truck over.
- To take off the R/C truck top, use the driver and bit PH2 and remove the four 7.7 mm Phillips screws highlighted.
Flip the R/C truck over.
To take off the R/C truck top, use the driver and bit PH2 and remove the four 7.7 mm Phillips screws highlighted.
1024
Step 2
- Half way remove the truck top so you can unhinge the antenna from the clips.
- Remove the R/C truck top completely.
Half way remove the truck top so you can unhinge the antenna from the clips.
Remove the R/C truck top completely.
Step 3
- Use the Driver and bit J1 to remove the top under-body plate by unscrewing the eight 9.5 mm Phillips screws.
Use the Driver and bit J1 to remove the top under-body plate by unscrewing the eight 9.5 mm Phillips screws.
Step 4
- After removing the plate use the driver and bit J1 to unscrew the two 9.5 mm Phillips screws that hold the side circuit board in.
After removing the plate use the driver and bit J1 to unscrew the two 9.5 mm Phillips screws that hold the side circuit board in.
Step 5
- Flip the R/C truck over and remove the four 10 mm bottom under-body plate screws using the driver and bit PH2.
Flip the R/C truck over and remove the four 10 mm bottom under-body plate screws using the driver and bit PH2.
Step 6
- Flip the R/C truck over again.
- Remember which wire is connected at which pin before desoldering.
- Desolder the 2 wires connected from the rear axle to the circuit board.
Flip the R/C truck over again.
Remember which wire is connected at which pin before desoldering.
Desolder the 2 wires connected from the rear axle to the circuit board.
Step 7
- You can refer to the tire replacement guide to keep salvageable tires from the removed axle.
You can refer to the tire replacement guide to keep salvageable tires from the removed axle.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
kevin
Member since: 02/10/2016
874 Reputation
6 Guides authored
Badges:
9
+6 more badges
Team
USF Tampa, Team 1-2, Sullivan Spring 2016
Member of USF Tampa, Team 1-2, Sullivan Spring 2016
USFT-SULLIVAN-S16S1G2
3 Members
6 Guides authored
martinrene - Sep 13, 2016
Reply
Nice guide. Do you know where to buy parts for the repairment? I have searched all over but cannot seem to find any parts.
kevin - Jan 15, 2019
Reply
Your best bet is a hobby shop I haven’t seen any online sources myself