Difficulty

Very difficult

Steps

7

Time Required

Suggest a time??

Sections

1

  • Front Axle
  • 7 steps

Flags

0

  • BackMaisto Rock Crawler

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Axle
  • Flip the R/C truck over.
  • To take off the R/C truck top, use the driver and bit PH2 and remove the four 7.7mm Philips screws highlighted.

Flip the R/C truck over.

To take off the R/C truck top, use the driver and bit PH2 and remove the four 7.7mm Philips screws highlighted.

1024

Step 2

  • Half way remove the truck top so you can unhinge the antenna from the clips.
  • Remove the R/C truck top completely.

Half way remove the truck top so you can unhinge the antenna from the clips.

Remove the R/C truck top completely.

Step 3

  • Use the Driver and bit J1 to remove the top under-body plate by unscrewing the eight 9.5mm Philips screws.

Use the Driver and bit J1 to remove the top under-body plate by unscrewing the eight 9.5mm Philips screws.

Step 4

  • After removing the plate use the driver and bit J1 to unscrew the two 9.5 mm Philips screws that hold the side circuit board in.

After removing the plate use the driver and bit J1 to unscrew the two 9.5 mm Philips screws that hold the side circuit board in.

Step 5

  • Flip the R/C truck over and remove the four 10 mm bottom under-body plate screws using the driver and bit PH2.

Flip the R/C truck over and remove the four 10 mm bottom under-body plate screws using the driver and bit PH2.

Step 6

  • Flip the R/C truck back over.
  • Remember which wire is connected at which pin before desoldering.
  • Desolder the 4 wires connected from the front axle to the circuit board.

Flip the R/C truck back over.

Remember which wire is connected at which pin before desoldering.

Desolder the 4 wires connected from the front axle to the circuit board.

Step 7

  • You can refer to the tire replacement guide to keep salvageable tires from the removed axle.

You can refer to the tire replacement guide to keep salvageable tires from the removed axle.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    kevin

Member since: 02/10/2016

874 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team 1-2, Sullivan Spring 2016                        

                                                  Member of USF Tampa, Team 1-2, Sullivan Spring 2016 



                    USFT-SULLIVAN-S16S1G2                     


                                            3 Members                     


                                            6 Guides authored