Difficulty

Easy

Steps

5

Time Required

                          5 - 7 minutes

Sections

1

  • Click Buttons
  • 5 steps

Flags

0

  • BackLogitech G602

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Click Buttons
  • Use a blue spudger to pry all 4 mouse feet off the bottom of the mouse.

Use a blue spudger to pry all 4 mouse feet off the bottom of the mouse.

1024

Step 2

  • Use a #00 screwdriver (3x5mm) to unscrew all 6 screws from under the mouse feet.

Use a #00 screwdriver (3x5mm) to unscrew all 6 screws from under the mouse feet.

Step 3

  • Use a blue spudger to open the bottom battery port.

Use a blue spudger to open the bottom battery port.

Step 4

  • Lift the top of the mouse from the base of the mouse (separate mouse in half) to expose the internal hardware.

Lift the top of the mouse from the base of the mouse (separate mouse in half) to expose the internal hardware.

Step 5

  • Use pliers to grip and remove the black covers over the button — the black cover and the button, a small white plastic piece, should come off).

Use pliers to grip and remove the black covers over the button — the black cover and the button, a small white plastic piece, should come off).

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      15 other people completed this guide.

Author

                                      with 2 other contributors 


                    Jerico Morales

Member since: 01/17/2018

1,138 Reputation

                                      4 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Eastern Washington University, Team S1-G1, Ramos Winter 2018                        

                                                  Member of Eastern Washington University, Team S1-G1, Ramos Winter 2018 



                    EWU-RAMOS-W18S1G1                     


                                            4 Members                     


                                            15 Guides authored

Owen Yuen - Jun 29, 2020

Reply

how are you supposed to put the feet back?

Erick Alonso Duque - Jul 15, 2020

you have to buy new ones… i’m more concerned of using pliers to take the switch apart, when ideally you should desolder it and replace it with a proper omron switch (not made in china)

Russell Reeling - Sep 2, 2020

He is only removing the cover, not the whole button. But doing it with pliers is skipping that it has two clips, one at each end and you could damage the board just twisting and pulling

S I - Aug 26, 2020

Reply

Are the side buttons the same?

Nonalbert Noneinstein - Jan 30, 2021

Reply

What do you do after step 5? And that copper spring looks wrong. It shouldn’t look like that. The correct positioning is this: https://community.pcgamingwiki.com/galle…