Difficulty
Moderate
Steps
15
Time Required
Suggest a time??
Sections
3
- Magellan Roadmate 9055-LM Back Panel Disassembly
- 8 steps
- Motherboard
- 4 steps
- Touchscreen
- 3 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackMagellan Roadmate 9055-LM
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Magellan Roadmate 9055-LM Back Panel Disassembly
- Flip your device with back panel facing up.
Flip your device with back panel facing up.
1024
Step 2
- Unscrew four Phillips #0 screws from the back panel.
Unscrew four Phillips #0 screws from the back panel.
Step 3
- Unscrew two Phillips #0 screws from the back panel.
Unscrew two Phillips #0 screws from the back panel.
Step 4
- Use a plastic opening tool to pop the right side of the panel.
Use a plastic opening tool to pop the right side of the panel.
Step 5
- Lifting the back panel too quickly or forcefully may damage the speaker cable and battery cable, which are still attached underneath.
- Gently lift up the back panel.
Lifting the back panel too quickly or forcefully may damage the speaker cable and battery cable, which are still attached underneath.
Gently lift up the back panel.
Step 6
- Remove the tape.
- Unplug the cable for the speaker.
Remove the tape.
Unplug the cable for the speaker.
Step 7
- Remove the cable of the battery.
- Tape removal is not necessary.
Remove the cable of the battery.
Tape removal is not necessary.
Step 8
- Place the back panel gently on the table.
Place the back panel gently on the table.
Step 9
Motherboard
- Unscrew four screws in the top left corner by using Phillips #0 size screwdriver.
Unscrew four screws in the top left corner by using Phillips #0 size screwdriver.
Step 10
- Remove all the electrical tapes from different places as indicated.
Remove all the electrical tapes from different places as indicated.
Step 11
- Remove the white clip attached with black and white wires.
- Carefully remove the clip by pulling it to the opposite side from the clip.
Remove the white clip attached with black and white wires.
Carefully remove the clip by pulling it to the opposite side from the clip.
Step 12
- Unplug the wires by pushing it down and slowly pulling it towards you.
- After unplugging the wires, take the motherboard out.
Unplug the wires by pushing it down and slowly pulling it towards you.
After unplugging the wires, take the motherboard out.
Step 13
Touchscreen
- Unscrew four Phillips #1 screws.
- Remove the two metal pieces on two corners.
Unscrew four Phillips #1 screws.
Remove the two metal pieces on two corners.
Step 14
- Lift touchscreen from the right side.
- Slide the touch screen out from the top left corner.
Lift touchscreen from the right side.
Slide the touch screen out from the top left corner.
Step 15
- Place the touchscreen gently on the table.
Place the touchscreen gently on the table.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
YuChe Chang
Member since: 10/18/2016
202 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
UMass Dartmouth, Team 1-5, Catania Fall 2016
Member of UMass Dartmouth, Team 1-5, Catania Fall 2016
UMASSD-CATANIA-F16S1G5
3 Members
7 Guides authored