Difficulty

Moderate

Steps

12

Time Required

                          3 minutes

Sections

2

  • Magellan Roadmate 9055-LM Back Panel Disassembly
  • 8 steps
  • Motherboard
  • 4 steps

Flags

0

  • BackMagellan Roadmate 9055-LM

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Magellan Roadmate 9055-LM Back Panel Disassembly
  • Flip your device with back panel facing up.

Flip your device with back panel facing up.

1024

Step 2

  • Unscrew four Phillips #0 screws from the back panel.

Unscrew four Phillips #0 screws from the back panel.

Step 3

  • Unscrew two Phillips #0 screws from the back panel.

Unscrew two Phillips #0 screws from the back panel.

Step 4

  • Use a plastic opening tool to pop the right side of the panel.

Use a plastic opening tool to pop the right side of the panel.

Step 5

  • Lifting the back panel too quickly or forcefully may damage the speaker cable and battery cable, which are still attached underneath.
  • Gently lift up the back panel.

Lifting the back panel too quickly or forcefully may damage the speaker cable and battery cable, which are still attached underneath.

Gently lift up the back panel.

Step 6

  • Remove the tape.
  • Unplug the cable for the speaker.

Remove the tape.

Unplug the cable for the speaker.

Step 7

  • Remove the cable of the battery.
  • Tape removal is not necessary.

Remove the cable of the battery.

Tape removal is not necessary.

Step 8

  • Place the back panel gently on the table.

Place the back panel gently on the table.

Step 9

              Motherboard
  • Unscrew four screws in the top left corner by using Phillips #0 size screwdriver.

Unscrew four screws in the top left corner by using Phillips #0 size screwdriver.

Step 10

  • Remove all the electrical tapes from different places as indicated.

Remove all the electrical tapes from different places as indicated.

Step 11

  • Remove the white clip attached with black and white wires.
  • Carefully remove the clip by pulling it to the opposite side from the clip.

Remove the white clip attached with black and white wires.

Carefully remove the clip by pulling it to the opposite side from the clip.

Step 12

  • Unplug the wires by pushing it down and slowly pulling it towards you.
  • After unplugging the wires, take the motherboard out.

Unplug the wires by pushing it down and slowly pulling it towards you.

After unplugging the wires, take the motherboard out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Umar siddique

Member since: 10/25/2016

201 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       UMass Dartmouth, Team 1-5, Catania Fall 2016                        

                                                  Member of UMass Dartmouth, Team 1-5, Catania Fall 2016 



                    UMASSD-CATANIA-F16S1G5                     


                                            3 Members                     


                                            7 Guides authored

Curt Cancino - Jan 23, 2020

Reply

Is there a source for replacement Magellan motherboards?