Difficulty
Easy
Steps
8
Time Required
5 - 10 minutes
Sections
1
- Magellan Roadmate 9055-LM Back Panel Disassembly
- 8 steps
Flags
0
BackMagellan Roadmate 9055-LM
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Magellan Roadmate 9055-LM Back Panel Disassembly
- Flip your device with back panel facing up.
Flip your device with back panel facing up.
1024
Step 2
- Unscrew four Phillips #0 screws from the back panel.
Unscrew four Phillips #0 screws from the back panel.
Step 3
- Unscrew two Phillips #0 screws from the back panel.
Unscrew two Phillips #0 screws from the back panel.
Step 4
- Use a plastic opening tool to pop the right side of the panel.
Use a plastic opening tool to pop the right side of the panel.
Step 5
- Lifting the back panel too quickly or forcefully may damage the speaker cable and battery cable, which are still attached underneath.
- Gently lift up the back panel.
Lifting the back panel too quickly or forcefully may damage the speaker cable and battery cable, which are still attached underneath.
Gently lift up the back panel.
Step 6
- Remove the tape.
- Unplug the cable for the speaker.
Remove the tape.
Unplug the cable for the speaker.
Step 7
- Remove the cable of the battery.
- Tape removal is not necessary.
Remove the cable of the battery.
Tape removal is not necessary.
Step 8
- Place the back panel gently on the table.
Place the back panel gently on the table.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
YuChe Chang
Member since: 10/18/2016
202 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
UMass Dartmouth, Team 1-5, Catania Fall 2016
Member of UMass Dartmouth, Team 1-5, Catania Fall 2016
UMASSD-CATANIA-F16S1G5
3 Members
7 Guides authored
