Magellan Roadmate 5265T Lmb Screen Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

Screen
4 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

BackMagellan RoadMate 5265T-LMB
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Screen

Place the device on a flat surface with the screen facing down.
Remove the screws on the four corners of the device with a phillips head, size 0 screwdriver.
Be sure to keep track of where you place the screws. A magnetic project mat works great for this.

Place the device on a flat surface with the screen facing down.

Remove the screws on the four corners of the device with a phillips head, size 0 screwdriver.

Be sure to keep track of where you place the screws. A magnetic project mat works great for this.

1024

Step 2

Using the plastic opening tool, gently pry apart the front and back casing panels around the edges of the device. While doing this the clips will gently be pried apart allowing you to separate the front and back casings.
There is a ribbon cable that will still connect the front panel to the motherboard.

Using the plastic opening tool, gently pry apart the front and back casing panels around the edges of the device. While doing this the clips will gently be pried apart allowing you to separate the front and back casings.

There is a ribbon cable that will still connect the front panel to the motherboard.

Step 3

The ribbon cable is attached to the motherboard by a ZIF (Zero Insertion Force) connector.
Using the nylon or metal spudger, gently pop up the ZIF connector tab and remove the ribbon cable. This will allow you to separate the front panel from the motherboard.
Gently pull the front panel away and set it on your workstation.

The ribbon cable is attached to the motherboard by a ZIF (Zero Insertion Force) connector.

Using the nylon or metal spudger, gently pop up the ZIF connector tab and remove the ribbon cable. This will allow you to separate the front panel from the motherboard.

Gently pull the front panel away and set it on your workstation.

Step 4

Use the plastic opening tool to push back the casing clips that hold the screen in place.
Applying light pressure against these clips will allow you to safely remove the screen from the front casing.
Once the screen has been removed, gently place it down on your workstation.

Use the plastic opening tool to push back the casing clips that hold the screen in place.

Applying light pressure against these clips will allow you to safely remove the screen from the front casing.

Once the screen has been removed, gently place it down on your workstation.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Shannon McKeown

Member since: 10/22/2015

513 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       UMass Dartmouth, Team 5-4, Gulbrandsen Fall 2015                        

                                                  Member of UMass Dartmouth, Team 5-4, Gulbrandsen Fall 2015 



                    UMASSD-GULBRANDSEN-F15S5G4                     


                                            3 Members                     


                                            5 Guides authored

Thomas Benedum - Jan 3, 2023

In the “what you need,” it would be helpful to provide a source for the replacement screen. I have not found the screen in my online search.

Incorrect Tools#

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Incorrect Tools

Introduction

What you need

Team