Magellan Roadmate 5250T Lm Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          20 - 35 minutes            

Sections

1

• Motherboard
• 5 steps

Flags

0

• BackMagellan RoadMate 5250T-LM

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Motherboard               

• Remove all four 5mm screws from the back of the device using a Phillips Head screwdriver size 000.

Remove all four 5mm screws from the back of the device using a Phillips Head screwdriver size 000.

1024

Step 2

• Open the casing of the device using a plastic spudger.

Open the casing of the device using a plastic spudger.

Step 3

• Remove the tape covering the display connector on top of the motherboard.
• Use a nylon spudger to flip up the black tab on the ZIF connector.
• Pull the ribbon cable out with tweezers.
• The ribbon cable may fall out once the tape is removed.

Remove the tape covering the display connector on top of the motherboard.

Use a nylon spudger to flip up the black tab on the ZIF connector.

Pull the ribbon cable out with tweezers.

The ribbon cable may fall out once the tape is removed.

Step 4

• Remove the motherboard from the device by unscrewing all three 4mm screws that are connecting it to the casing with a Phillips Head screwdriver size 000.

Remove the motherboard from the device by unscrewing all three 4mm screws that are connecting it to the casing with a Phillips Head screwdriver size 000.

Step 5

• Disconnect the original battery from the motherboard and the speaker by desoldering all five wires that attach them to the motherboard.
• Click here to visit iFixIt’s guide on soldering.

Disconnect the original battery from the motherboard and the speaker by desoldering all five wires that attach them to the motherboard.

Click here to visit iFixIt’s guide on soldering.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Parker Dunaway                     

Member since: 01/29/2016

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       University of Alabama, Team 1-7, Sydow campbell Spring 2016                        

                                                  Member of University of Alabama, Team 1-7, Sydow campbell Spring 2016 



                    UA-SYDOW CAMPBELL-S16S1G7                     


                                            4 Members                     


                                            3 Guides authored