Difficulty
Moderate
Steps
7
Time Required
25 minutes
Sections
2
- Battery
- 4 steps
- Motherboard
- 3 steps
Flags
0
BackMagellan RoadMate 2120T-LM
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn the GPS over on its backside and remove the six 3 mm Phillips #1 screws.
Turn the GPS over on its backside and remove the six 3 mm Phillips #1 screws.
1024
Step 2
- Pry up on back panel with black spudger
Pry up on back panel with black spudger
Step 3
- Disconnect battery and speaker cables from the motherboard at indicated places.
Disconnect battery and speaker cables from the motherboard at indicated places.
Step 4
- Use a spudger to remove the battery from the back panel.
- If at all possible, please try to use a regular nylon spudger before resorting to a metal spudger. Metal spudgers are much sharper, and have the potential to accidentally pierce the battery.
- There is a strong adhesive holding the battery to the back panel.
- This step is not a prerequisite for replacement of other components.
Use a spudger to remove the battery from the back panel.
If at all possible, please try to use a regular nylon spudger before resorting to a metal spudger. Metal spudgers are much sharper, and have the potential to accidentally pierce the battery.
There is a strong adhesive holding the battery to the back panel.
This step is not a prerequisite for replacement of other components.
Step 5
Motherboard
- Remove the four 3 mm Phillips #1 screws from the motherboard.
- In the picture three out of four screws have already been removed.
Remove the four 3 mm Phillips #1 screws from the motherboard.
In the picture three out of four screws have already been removed.
Step 6
- Remove black tape covering connection ribbon for touch-screen
Remove black tape covering connection ribbon for touch-screen
Step 7
- Pull up on the brown tab holding down the ribbon.
- In this picture the brown tab has already been lifted.
- Lift up on the motherboard and remove it from device.
Pull up on the brown tab holding down the ribbon.
In this picture the brown tab has already been lifted.
Lift up on the motherboard and remove it from device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
John Doe
Member since: 01/12/2016
503 Reputation
4 Guides authored
Badges:
5
+2 more badges
Team
Eastern Washington University, Team 1-5, Rowley Winter 2016
Member of Eastern Washington University, Team 1-5, Rowley Winter 2016
EWU-ROWLEY-W16S1G5
2 Members
4 Guides authored
