Difficulty

Moderate

Steps

8

Time Required

                          25 minutes

Sections

3

  • Battery
  • 4 steps
  • Motherboard
  • 3 steps
  • Display Assembly
  • 1 step

Flags

0

  • BackMagellan RoadMate 2120T-LM

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn the GPS over on its backside and remove the six 3 mm Phillips #1 screws.

Turn the GPS over on its backside and remove the six 3 mm Phillips #1 screws.

1024

Step 2

  • Pry up on back panel with black spudger

Pry up on back panel with black spudger

Step 3

  • Disconnect battery and speaker cables from the motherboard at indicated places.

Disconnect battery and speaker cables from the motherboard at indicated places.

Step 4

  • Use a spudger to remove the battery from the back panel.
  • If at all possible, please try to use a regular nylon spudger before resorting to a metal spudger. Metal spudgers are much sharper, and have the potential to accidentally pierce the battery.
  • There is a strong adhesive holding the battery to the back panel.
  • This step is not a prerequisite for replacement of other components.

Use a spudger to remove the battery from the back panel.

If at all possible, please try to use a regular nylon spudger before resorting to a metal spudger. Metal spudgers are much sharper, and have the potential to accidentally pierce the battery.

There is a strong adhesive holding the battery to the back panel.

This step is not a prerequisite for replacement of other components.

Step 5

              Motherboard
  • Remove the four 3 mm Phillips #1 screws from the motherboard.
  • In the picture three out of four screws have already been removed.

Remove the four 3 mm Phillips #1 screws from the motherboard.

In the picture three out of four screws have already been removed.

Step 6

  • Remove black tape covering connection ribbon for touch-screen

Remove black tape covering connection ribbon for touch-screen

Step 7

  • Pull up on the brown tab holding down the ribbon.
  • In this picture the brown tab has already been lifted.
  • Lift up on the motherboard and remove it from device.

Pull up on the brown tab holding down the ribbon.

In this picture the brown tab has already been lifted.

Lift up on the motherboard and remove it from device.

Step 8

              Display Assembly
  • Pry back on the plastic shell surrounding the touchscreen and remove the screen.

Pry back on the plastic shell surrounding the touchscreen and remove the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    John Doe

Member since: 01/12/2016

503 Reputation

                                      4 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Eastern Washington University, Team 1-5, Rowley Winter 2016                        

                                                  Member of Eastern Washington University, Team 1-5, Rowley Winter 2016 



                    EWU-ROWLEY-W16S1G5                     


                                            2 Members                     


                                            4 Guides authored