Mad Catz Street Fighter X Tekken Pro Fightstick Lever Replacement Repair Guide

Difficulty

Easy

Steps

8

Time Required

                          10 - 25 minutes            

Sections

1

• Joystick
• 8 steps

Flags

0

• BackGame Controller

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Before you start this guide make sure to test that the controller is indeed broken by plugging the controller in and moving the lever around to confirm if it is indeed not working or not. Ensure that your replacement lever is compatible with this controller.

If the lever is still not working please proceed to use this guide on how to replace your lever.

What you need

Step 1

              Joystick               

• Unplug your controller from your console or pc.

Unplug your controller from your console or pc.

1024

Step 2

• Remove the four 3mm screws with a Philips #0 screwdriver.

Remove the four 3mm screws with a Philips #0 screwdriver.

Step 3

• Remove the six 0.9mm screws with a Phillips #00 screwdriver.

Remove the six 0.9mm screws with a Phillips #00 screwdriver.

Step 4

• Remove the metal plate cover.
• Find the lever inside of the controller.

Remove the metal plate cover.

Find the lever inside of the controller.

Step 5

• Insert your Flathead screwdriver into the middle of the lever to hold it in place.
• Twist the ball to remove it from the lever.
• Remove the ball top from the lever.

Insert your Flathead screwdriver into the middle of the lever to hold it in place.

Twist the ball to remove it from the lever.

Remove the ball top from the lever.

Step 6

• Remove the four 1.1mm screws holding the lever in place with your Phillips #0 screwdriver.

Remove the four 1.1mm screws holding the lever in place with your Phillips #0 screwdriver.

Step 7

• Remove the lever from the casing of the controller.

Remove the lever from the casing of the controller.

Step 8

• Pull the cable connected to the lever out of the socket.
• Remove the lever from the case.

Pull the cable connected to the lever out of the socket.

Remove the lever from the case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Jordan                     

Member since: 07/06/2021

157 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       York University, Team S15-G1, Allen Summer 2021                        

                                                  Member of York University, Team S15-G1, Allen Summer 2021 



                    YORK-ALLEN-SU21S15G1                     


                                            1 Member                     


                                            1 Guide authored