Difficulty
Moderate
Steps
9
Time Required
Suggest a time??
Sections
3
- Battery
- 2 steps
- Keyboard
- 3 steps
- Trackpad
- 4 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackMacintosh Powerbook 5300cs
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- The battery compartment is located in the front-right side of the laptop.
The battery compartment is located in the front-right side of the laptop.
1024
Step 2
- To insert the battery, gently slide it into the compartment until it clicks in place.
- To remove, slide the button highlighted in the red rectangle to the right to release the battery and slide it from the compartment.
To insert the battery, gently slide it into the compartment until it clicks in place.
To remove, slide the button highlighted in the red rectangle to the right to release the battery and slide it from the compartment.
Step 3
Keyboard
- With the laptop upside down and with the battery removed, use a Torx #9 screw driver to remove the three .84 in. screws shown.
With the laptop upside down and with the battery removed, use a Torx #9 screw driver to remove the three .84 in. screws shown.
Step 4
- Carefully pull up on the front of the keyboard to pop it out from the case.
- Then slide the back out so the keyboard becomes nearly free.
Carefully pull up on the front of the keyboard to pop it out from the case.
Then slide the back out so the keyboard becomes nearly free.
Step 5
- Disconnect the ribbon that is connecting the keyboard to the rest of the computer.
- Pull the keyboard out and repair or replace as needed.
Disconnect the ribbon that is connecting the keyboard to the rest of the computer.
Pull the keyboard out and repair or replace as needed.
Step 6
Trackpad
- Remove the front plastic panel of the laptop by carefully lifting it up.
Remove the front plastic panel of the laptop by carefully lifting it up.
Step 7
- Remove the orange stripped ribbon that connects the trackpad to the rest of the laptop by carefully pulling up.
Remove the orange stripped ribbon that connects the trackpad to the rest of the laptop by carefully pulling up.
Step 8
- With a Torx #9 screwdriver, remove the two .20 in. screws circled in red that are holding the trackpad in place.
- Then disconnect the ribbon highlighted with the red rectangle connecting the trackpad to the laptop.
With a Torx #9 screwdriver, remove the two .20 in. screws circled in red that are holding the trackpad in place.
Then disconnect the ribbon highlighted with the red rectangle connecting the trackpad to the laptop.
Step 9
- The trackpad can now be removed from the laptop.
The trackpad can now be removed from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 8 other contributors
Ronan
Member since: 10/10/2011
63 Reputation
4 Guides authored
Badges:
5
+2 more badges
Team
Cal Poly, Team 6-1, Regan Fall 2011
Member of Cal Poly, Team 6-1, Regan Fall 2011
CPSU-REGAN-F11S6G1
4 Members
6 Guides authored