Macbook Pro 15 Unibody Late 2011 Lower Case Replacement Repair Guide

Difficulty

Easy

Steps

2

Time Required

Suggest a time??

Sections

1

• Lower Case
• 2 steps

Flags

0

• BackMacBook Pro 15" Unibody Late 2011

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Lower Case               

• Remove the following ten screws securing the lower case to the upper case:
• Three 13.5 mm (14.1 mm) Phillips screws.
• Seven 3 mm Phillips screws.
• When removing these screws, note how they come out at a slight angle. They must be reinstalled the same way.

Remove the following ten screws securing the lower case to the upper case:

Three 13.5 mm (14.1 mm) Phillips screws.

Seven 3 mm Phillips screws.

When removing these screws, note how they come out at a slight angle. They must be reinstalled the same way.

1024

Step 2

• Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.
• Remove the lower case and set it aside.

Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.

Remove the lower case and set it aside.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      22 other people completed this guide.                                             

Author

                                      with 6 other contributors 

                    Miroslav Djuric                     

156,282 Reputation

                                      144 Guides authored                  



                       Badges:
                       54







                                                        +51 more badges