Difficulty

Easy

Steps

7

Time Required

Suggest a time??

Sections

4

  • Access Door
  • 2 steps
  • Battery
  • 1 step
  • Lower Case
  • 2 steps
  • Mid Wall
  • 2 steps

Flags

0

  • BackMacBook Pro 15" Unibody Late 2008 & Early 2009

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Access Door
  • With the case closed, place the Unibody top-side down on a flat surface.
  • Depress the grooved side of the access door release latch enough to grab the free end. Lift the release latch until it is vertical.

With the case closed, place the Unibody top-side down on a flat surface.

Depress the grooved side of the access door release latch enough to grab the free end. Lift the release latch until it is vertical.

1024

Step 2

  • The access door should now be raised enough to lift it up and out of the Unibody.

The access door should now be raised enough to lift it up and out of the Unibody.

Step 3

              Battery
  • Be sure the access door release latch is vertical before proceeding.
  • Grab the translucent plastic tab and pull the battery up and out of the Unibody.
  • If the latch is depressed it will lock the battery in place.

Be sure the access door release latch is vertical before proceeding.

Grab the translucent plastic tab and pull the battery up and out of the Unibody.

If the latch is depressed it will lock the battery in place.

Step 4

              Lower Case
  • Remove the following eight screws securing the lower case to the chassis:
  • One 5.4 mm Phillips screw.
  • Three 14 mm Phillips screws.
  • Four 3.5 mm Phillips screws.

Remove the following eight screws securing the lower case to the chassis:

One 5.4 mm Phillips screw.

Three 14 mm Phillips screws.

Four 3.5 mm Phillips screws.

Step 5

  • Using both hands, lift and remove the lower case off the upper case.

Using both hands, lift and remove the lower case off the upper case.

Step 6

              Mid Wall
  • Remove the following 5 screws securing the mid wall to the upper case:
  • Three 10.5 mm Phillips screws.
  • Two 3.7 mm Phillips screws.

Remove the following 5 screws securing the mid wall to the upper case:

Three 10.5 mm Phillips screws.

Two 3.7 mm Phillips screws.

Step 7

  • Lift the mid wall out of the upper case.

Lift the mid wall out of the upper case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 4 other contributors 


                    Walter Galan

682,038 Reputation

                                      1,203 Guides authored                  



                       Badges:
                       54







                                                        +51 more badges

Mitch - Mar 14, 2018

Reply

Anyone know what size screws hold the black rubber battery pads on either side of the trackpad?

They are Phillips head, but I can’t find the size in any of the guides for the MacBookPro5,1 — Help?