Macbook Pro 15 Retina Display Late 2013 I O Board Cable Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Lower Case
2 steps
Battery Connector
2 steps
I/O Board Cable
2 steps

Flags

BackMacBook Pro 15" Retina Display Late 2013
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Lower Case

Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:
Eight 3.0 mm
Two 2.3 mm

Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:

Eight 3.0 mm

Two 2.3 mm

1024

Step 2

Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.
Set the lower case aside.

Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.

Set the lower case aside.

Step 3

              Battery Connector

Peel back the warning label covering the battery connector.

Peel back the warning label covering the battery connector.

Step 4

Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board.
Bend the battery cables back and out of the way, ensuring that the battery connector doesn’t accidentally make contact with the logic board.

Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board.

Bend the battery cables back and out of the way, ensuring that the battery connector doesn’t accidentally make contact with the logic board.

Step 5

              I/O Board Cable

Using the flat end of a spudger, pry the I/O board cable straight up out of its socket on the I/O board.
In a similar fashion, remove the I/O board cable from its socket on the I/O board.

Using the flat end of a spudger, pry the I/O board cable straight up out of its socket on the I/O board.

In a similar fashion, remove the I/O board cable from its socket on the I/O board.

Step 6

Remove the I/O board cable from the MacBook Pro.

Remove the I/O board cable from the MacBook Pro.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors

                    Andrew Optimus Goldheart

Member since: 10/17/2009

491,689 Reputation

                                      411 Guides authored                  



                       Badges:
                       44







                                                        +41 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,767 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team