Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

3

  • Lower Case
  • 2 steps
  • Battery Connector
  • 2 steps
  • I/O Board Cable
  • 2 steps

Flags

0

  • BackMacBook Pro 15" Retina Display Early 2013

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Lower Case               
  • Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:
  • Eight 3.0 mm
  • Two 2.3 mm

Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:

Eight 3.0 mm

Two 2.3 mm

1024

Step 2

  • Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.
  • Set the lower case aside.

Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.

Set the lower case aside.

Step 3

              Battery Connector               
  • Peel back the warning label covering the battery connector.

Peel back the warning label covering the battery connector.

Step 4

  • Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board.
  • Bend the battery cables back and out of the way, ensuring that the battery connector doesn’t accidentally make contact with the logic board.

Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board.

Bend the battery cables back and out of the way, ensuring that the battery connector doesn’t accidentally make contact with the logic board.

Step 5

              I/O Board Cable               
  • Using the flat end of a spudger, pry the I/O board cable straight up out of its socket on the I/O board.
  • In a similar fashion, remove the I/O board cable from its socket on the I/O board.

Using the flat end of a spudger, pry the I/O board cable straight up out of its socket on the I/O board.

In a similar fashion, remove the I/O board cable from its socket on the I/O board.

Step 6

  • Remove the I/O board cable from the MacBook Pro.

Remove the I/O board cable from the MacBook Pro.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Sam Goldheart                     

Member since: 10/18/2012

455,549 Reputation

                                      548 Guides authored                  



                       Badges:
                       48







                                                        +45 more badges                           

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,767 Guides authored                     

Andy - Oct 31, 2018

Reply

Will this work with a mid-2012 15” MacBook Pro Retina as well?