Featured
Featured Guide
Difficulty
Easy
Steps
3
Time Required
10 minutes
Sections
- Battery
- 1 step
- RAM Shield
- 1 step
- RAM
- 1 step
Flags
1
Featured Guide
This guide has been found to be exceptionally cool by the iFixit staff.
BackMacBook Pro 15" Core 2 Duo Models A1226 & A1260
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Use your fingers to push both battery release tabs away from the battery, and lift the battery out of the computer.
Use your fingers to push both battery release tabs away from the battery, and lift the battery out of the computer.
1024
Step 2
RAM Shield
- Remove the three identical 2mm Phillips screws from the memory door.
- Lift the memory door up enough to grip it and slide it toward you, pulling it away from the casing.
Remove the three identical 2mm Phillips screws from the memory door.
Lift the memory door up enough to grip it and slide it toward you, pulling it away from the casing.
Step 3
RAM
- Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to “pop” up.
- Pull the chip directly out from its connector.
- If there are two RAM chips installed, repeat the above procedure for the second chip.
Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to “pop” up.
Pull the chip directly out from its connector.
If there are two RAM chips installed, repeat the above procedure for the second chip.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
220 other people completed this guide.
Author
with 6 other contributors
Walter Galan
682,038 Reputation
1,203 Guides authored
Badges:
54
+51 more badges
cesrafa - Nov 24, 2011
Reply
Really easy to install RAM on Macbook Pro 15’’ Model A1226!!
I had 2GB of RAM (1GB and 1GB), so when I read this tutorial I decided to buy one ram of 2GB 667Mhz and It is working great (now I’ve got a total of 3 GB). I’m willing to install up to 6 GB with this same tutorial. Recommended!