Macbook Pro 13 Unibody Mid 2010 Lower Case Replacement Repair Guide

Difficulty

Easy

Steps

2

Time Required

                          3 - 5 minutes            

Sections

1

• Lower Case
• 2 steps

Flags

0

• BackMacBook Pro 13" Unibody Mid 2010

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Remove the lower case screws               

• Remove the following 10 screws securing the lower case to the MacBook Pro 13" Unibody:
• Seven 3 mm Phillips screws.
• Three 13.5 mm Phillips screws.

Remove the following 10 screws securing the lower case to the MacBook Pro 13" Unibody:

Seven 3 mm Phillips screws.

Three 13.5 mm Phillips screws.

1024

Step 2

              Lift the lower case away               

• Slightly lift the lower case and push it toward the rear of the computer to free the mounting tabs.

Slightly lift the lower case and push it toward the rear of the computer to free the mounting tabs.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      42 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Walter Galan                     

682,038 Reputation

                                      1,203 Guides authored                  



                       Badges:
                       54







                                                        +51 more badges                           

glaubitz - Feb 24, 2012

Reply

Those are actually not seven identical 3 mm screws. The screw located at the ventilation side next to the three 13.5 mm screws does not have a shaft as compared to the other six 3 mm screws.